Canon EOS M Instruction Manual page 213

Text Entry Procedure
Entering text:
In the bottom area, type directly with the keyboard or turn the < In the bottom area, type directly with the keyboard or turn the < In the bottom area, type directly with the keyboard or turn the <5>
dial to select a character, then press dial to select a character, then press < dial to select a character, then press <Q/0> to enter it.
Changing the entry mode:
Tap [ Tap [ Tap [ ] at the bottom right of the bottom entry area. Each time ] at the bottom right of the bottom entry area. Each time ] at the bottom right of the bottom entry area. Each time
you tap it, the entry mode will change as follows: Lower case a
you tap it, the entry mode will change as follows: Lower case you tap it, the entry mode will change as follows: Lower case
Numerals / Symbols 1 a Numerals / Symbols 2 a Upper case.
Deleting a character: Deleting a character: Deleting a character:
Either tap [ Either tap [ Either tap [
character.
Exiting:
Tap [OK] to complete the text entry, and the screen in step 2 will ] to complete the text entry, and the screen in step 2 will ] to complete the text entry, and the screen in step 2 will
reappear.
Canceling the text entry:
Tap [Cancel] to cancel the text entry, and the screen in step 2 will
reappear.
You can also set or check the copyright information with EOS Utility
(provided software, p.340).
Changing the entry area:
Press the <B> button to toggle
between the top and bottom entry
areas.
Moving the cursor:
Either tap [
<YA>/<ZO> button to move the
cursor.
a a
Numerals / Symbols 2 Numerals / Symbols 2
] or press the < ] or press the < ] or press the <M> button to delete one
]/[ ] or press the
0 0
Q
<Q / /
Handy Features
213