Tilt Support Lever; Top Cowling Lock Levers; Flushing Device - Yamaha 60F Owner's Manual

E
EMD60010

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
403011
EMD63111

TOP COWLING LOCK LEVERS

To remove the engine top cowling, turn
the front lock lever and rear lock lever(s).
Then lift off the cowling. When replacing
the cowling, check to be sure it fits prop-
erly in the rubber seal. Then lock the
q
cowling again by returning the levers to
the locked position.
301041*
1 Top cowling lock lever
q
301042*
EMU01146

FLUSHING DEVICE

This device 1 is used to clean the cooling
water passages of the motor using a gar-
q
den hose and tap water.
NOTE:
Refer to "Cleaning Cooling-water Pas-
sages" in Chapter 4 for instructions on
usage.
000945
2-15