Troubleshooting - Motorola Spirit MU22CV User Manual

Radio has no power.
Problem:
Solution: Reposition or charge the battery pack.
Problem: Battery does not charge or last long enough.
Solution: If you're using the charger adapter, make sure the plug is firmly
connected into the jack and the light on the adapter glows indicating
correct charging status.
If the desktop charger is used, make sure the battery is positioned
properly and the light on the tray is on.
The radio should be turned off when charging. Charge time will be
longer if it is left on.
Heavy use may require a spare battery or recharging.
Problem: Message not transmitted.
Solution: Make sure the Push-To-Talk button is completely pressed and the
Transmit Light is on while you talk.
Insert, reposition, or charge the battery pack.
Problem: Message not received.
Confirm that the radios are set on the same channel and interference-
Solution:
eliminator code settings. See Chapter 3 and the Appendix.
Obstructions and operating indoors or in vehicles may interfere with
communication. Change your location.
Check to make sure the radio is on and the volume is set to a
comfortable listening level.
The code must be set to "OFF" on your radio to receive a message
from a radio without code capability.
Make sure Push-To-Talk is not inadvertently being pressed on the
receiving radio.
Hearing other conversations or noise on the radio.
Problem:
Solution: Check that your interference eliminator code is set (active settings are
1 through 38).
Other users may be using channel–change code. If you are part of a
group, change the code on all radios.

5. Troubleshooting

CHAPTER 5: Troubleshooting
27