Motorola Spirit MU22CV User Manual page 20

Do not disassemble the charger. Incorrect reassembly can result in
electric shock or fire. Call Black Box if it needs to be repaired.
To reduce the risk of electric shock, unplug the charger from the outlet
before attempting any maintenance or cleaning. Turning off controls
does not reduce this risk.
To reduce the risk of injury, charge only Motorola nickel-cadmium
rechargeable battery packs. Other types of batteries can burst, causing
personal injury and damage.
1. Connect the desktop charger and charger adapter (see the illustration below).
2. Charge the battery while inside the radio by placing the radio in the desktop
charger with the radio facing toward you.
You can also charge the battery by removing the battery from the radio and
placing it in the desktop charger. The silver contacts must face down, and the
arrow must point toward the front of the charger.
3. The light on top of the desktop charger will glow continuously when the radio
(or battery) is inserted. If the light does not come on, make sure the radio (or
battery) is properly inserted and check the battery/charger contacts to be sure
they are clean. The light will continue to glow until the radio (or battery) is
removed from the desktop charger.
4. Allow 10 hours for the battery to fully charge.
CHAPTER 2: Getting Started
19