Table of Contents
Advertisement
Quick Links
PI100SB_ManualEN_050807.qxp
MICROSLIM POCKET POWER INVERTER
WITH USB CHARGING PORT
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
BEFORE YOU CALL, HAVE THE CATALOG No, AND DATE CODE
AVAILABLE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A
SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS
TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND
UNDERSTAND THE INSTRUCTION MANUAL.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Catalog # PI100SB
May '07
6/25/07
2:19 PM
INSTRUCTION MANUAL
1-800-544-6986
VITAL TO BLACK & DECKER.
Form # 90516753
Copyright © 2007 Black & Decker
Page i
Catalog Number PI100SB
Printed in China
Advertisement
Table of Contents
Related Manuals for Black & Decker PI100SB
Summary of Contents for Black & Decker PI100SB
-
Page 1: Instruction Manual
2:19 PM Page i MICROSLIM POCKET POWER INVERTER WITH USB CHARGING PORT INSTRUCTION MANUAL Catalog Number PI100SB Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product. BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL... - Page 2 PI100SB_ManualEN_050807.qxp 6/25/07 2:19 PM Page 1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. •...
-
Page 3: Safety Guidelines - Definitions
PI100SB_ManualEN_050807.qxp 6/25/07 2:19 PM Page 2 • EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. -
Page 4: Controls And Functions
Review cautionary markings on these products and on engine. INTRODUCTION Thank you for purchasing the PI100SB Microslim Pocket Power Inverter with USB Charging Port. This inverter can be used to operate personal electronics and mobile office equipment, such as: laptop computers, digital/video cameras, MP3 players, cell phones, PDAs, and more. -
Page 5: Operating Instructions
Troubleshooting Section of this Instruction Manual.) To turn the unit off, disconnect it from the 12 volt DC power source. Always connect the PI100SB to the 12 volt DC power source before plugging any devices into the unit. -
Page 6: Protective Features
The standard North American 115 volt AC and USB outlets allow simultaneous operation of multiple devices. Simply plug the equipment into the unit and operate normally. Ensure that the wattage of all equipment simultaneously plugged into the PI100SB does not exceed 100 watts continuous. Rated Versus Actual Current Draw of Equipment Most electrical tools, appliances, electronic devices and audio/visual equipment have labels that indicate the power consumption in amps or watts. -
Page 7: Care And Maintenance
Storage 1. Ideal storage temperature range is 50-68°F (10-20°C). 2. Store and use the PI100SB Microslim Pocket Power Inverter in a cool, dry place with adequate ventilation for all-around air circulation. 3. Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness. -
Page 8: Service Information
PI100SB_ManualEN_050807.qxp 6/25/07 2:19 PM Page 7 Common Power Output Problems Possible Causes Recommendations Battery voltage Recharge battery or check below 10.0 volts DC power supply. Equipment being operated Reduce load to maximum 100 watts. draws too much power Inverter in thermal Allow inverter to cool down.