Advertisement
setpoint).
Both of these types of Program entries are
available to be set in one configuration so that
it
is
not
necessary
thermostat for each change in the season
(twice a year). Instead, you may program the
thermostat once with both a summer-time
program and a winter-time program. In fact,
Comfort Window comes with both a typical
summer-time
program
program pre-programmed, ready to use out-of-
the-box.
No programming, no
needed.
Vacation Mode
Comfort Window provides a one-touch way to
put your thermostat into Vacation Mode by
pressing the Vacation button on the home
screen. In this mode, Comfort Window's high
and low temperature settings will be set to the
Vacation Mode settings as defined previously
Figure 22: Predefined Vacation Settings
Figure 23: One-Touch Vacation Mode Icon
to
re-program
the
and
winter-time
settings
on the Settings page.
Figure 24: Vacation Mode
Built-In Ventilation Controls
Comfort Window provides built-in controls for
automatic ventilation. In lieu of adding extra
ventilation control equipment (such as a fresh
air timer), the Comfort Window provides the
same level of system fan timing control built-in.
The Ventilation Controls provide options to use
either a separate duct controlled by the system
fan (a fresh air damper system) or to share the
duct-work used by the Economizer feature
(which itself is either controlled by the system
fan or by the ECD output). Then, by setting
the minimum number of minutes per hour to
run the ventilation controls, Comfort Window
will optimize the amount of outdoor air that is
allowed into the home.
ensuring that any time the system fan runs, it
is logged in the ventilation control timer. Other
fresh air timers are unable to do this as they
do not know when the system fan is being told
to run for other reasons (such as for cooling).
Figure 25: Ventiliation Controls
15 of 24
PCB0001C-01-BHP-PDII0614
It does this by
Advertisement
