Download Print this page

Breville BKT500 Instruction Booklet page 7

Breville bkt500 kettle toaster combo
Hide thumbs Also See for BKT500:

Advertisement

OPERATING
NOTE
Do not remove the kettle from
the power base during operation.
Ensure the kettle is switched to 'OFF'
position after the water has boiled,
before removing the kettle from the
power base.
KETTLE SAFETy BOIL dRy
PROTECTION
The kettle is fitted with a safety device,
which protects against overheating, should
the appliance be operated with insufficient
water. If this occurs the kettle will stop
heating, and the illuminated light within
the ON/OFF switch will go out. Switch
the ON/OFF switch to 'OFF', switch off
at the power outlet and allow the kettle to
cool before refilling. The safety device will
automatically reset when the kettle has
cooled down.
For additional safety your kettle is fitted with
an additional thermal cut out. In the event
of overheating, the kettle will automatically
shut down to prevent further damage.
Should this occur, take your kettle to an
authorised Breville Service Centre.
12
OPERATION OF THE TOASTER
When using the toaster for the first time,
we suggest you toast on setting No. 3 or
4. Varying types of bread and personal
preference may require a different browning
setting, for example: raisin toast and white
light-textured breads may require a lower
setting, whilst heavier textured rye breads
may require a higher setting.
1.
Insert the power plug into a 230/240V
power outlet and switch 'ON'.
2.
Place only 2 slices of bread or 2 halves of
an english muffin or bagel into each of
the bread slots. Ensure the bread slices
or muffin/bagel halves are not too large
or thick to fit in the slots.
3.
Select the desired browning setting
using the browning control dial.
Colour settings range from '1' lightest
to '6' darkest.
4.
Press the high lift lever down until
it clicks into place and the indicator
notch above the browning control dial
will illuminate. Toasting cycle will
automatically commence.
NOTE
If the Kettle Toaster Combo™ appliance
is not plugged in, and switched on at
the power outlet, the high lift lever will
not 'click' into place.
5.
The toaster turns off when the
desired toast colour is achieved and
automatically raises the toast. The
toasting process can be stopped at any
time by pressing the CANCEL button
located on the browning control knob or
switching off at the power outlet.
OPERATING
HIGH LIFT
To remove smaller items such as crumpets
and english muffins, lift the high lift lever
approximately 20mm above the starting
position.
In the unlikely event that the bread or
crumpet becomes jammed, switch the
power off at the power outlet. Remove the
power plug from the power outlet and then
carefully ease the bread out of the toaster,
ensuring that you do not damage the self
centering slots or the elements.
TOASTING FROZEN BREAd
To toast frozen bread, place the bread
into the toasting slots, select the desired
browning setting, lower the high lift lever
until it clicks into place then press the
FROZEN button which will illuminate.
Selecting this button will extend the
toasting time.
A BIT MORE™
This function allows you to add
'A Bit More'™ if the toast requires a
little more toasting or heating. Place toast
into toasting slots, lower the high lift
lever until it clicks into place and press
'A Bit More'™ button which will illuminate.
STOP
The toasting, frozen and 'A Bit More'™
functions can be cancelled at any time
by pressing the CANCEL button. The
toaster will turn off and automatically
raise the toast.
WARNING
Never attempt to extract jammed
toast, crumpets or english muffins or
any other item with a knife or any other
object, as contact with live elements
may not only damage the elements, but
cause electrocution.
The lid of the kettle must always be
locked closed whilst the kettle
is in operation.
13

Advertisement

loading