Advertisement
OPERATING
your new Breville product
OPERATING
Remove any promotional materials and
packaging materials before using your
toaster kettle combo appliance for the
first time.
The power plug of the Breville Kettle
Toaster Combo™ has to be plugged into a
power outlet and switched on at the power
outlet before the toaster or the kettle can be
activated. The toaster and the kettle can be
operated separately or together.
OPERATION OF THE KETTLE
It is recommended before first use to fill
the kettle to the maximum level with cold
tap water, bring to the boil then discard the
water. The kettle will only operate when
positioned on the power base with the ON/
OFF switch in the 'ON' position. The kettle
will automatically switch off once the water
has boiled.
1.
To fill the kettle with water, remove it
from the power base and open the lid
by pushing the lid release button on top
of the handle. The lid will automatically
open. Fill with desired amount of
water. Always fill the kettle between the
minimum and maximum marks on the
water window. Too little water will result
in the kettle switching off.
2.
Ensure that the lid is closed and locked
firmly into place. Place the kettle
securely onto the power base. Insert
the power plug into a 230/240V power
outlet and switch 'ON'.
3.
Press the lower section of the ON/
OFF switch on the handle to the 'ON'
position. The power symbol on the
switch will illuminate.
4.
The kettle will automatically switch
'OFF' once the water has boiled. Lift the
kettle from the power base and pour the
water. Take care to hold the kettle level,
especially when filled to the maximum
level. To re-boil it may be necessary
to wait for a few seconds to allow the
control to reset.
5.
The kettle can be switched off manually
by pressing the upper section of the
ON/OFF switch on the handle to the
'OFF' position.
6.
The kettle should be stored on its power
base when not in use. The appliance
should be switched off at the power
outlet and the power cord unplugged
from the power outlet when not in use.
NOTE
The kettle must only be used with
the power base supplied. Use caution
when pouring water from your kettle,
as boiling water will scald. Do not
pour the water too quickly.
NOTE
Always fill the kettle between the
minimum (MIN) and the maximum
(MAX) marks on the water window of
the kettle. Too little water will result
in the kettle switching 'OFF'. Filling
above the maximum mark on the
exterior of the kettle may result in
boiling water splashing from the kettle.
WARNING
This kettle is designed for the boiling
of drinking quality water only. Never
use it to heat or boil any other liquids
or foodstuffs. The lid should always be
firmly in place and locked in the closed
position before and during use.
11
Advertisement
