Installation; Led Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash (100ms
On/Off)
System Hardware Manual
Four (4DIOPU) DID trunk circuits or four OPX circuits
Two Blade status LEDs
Table 4-43 CD-4DIOPB Maximum Upgrade Capacities
maximum capacities for the CD-4DIOPB blades when they are
upgraded.
Table 4-43 CD-4DIOPB Maximum Upgrade Capacities
19" Chassis
with CPU
5
5.5.2

Installation

The CD-4DIOPB can be installed in any universal slot.
5.5.3

LED Indications

LED indications for the CD-4DIOPB are listed in
CD-4DIOPB LED
function and LED and Operational status. Refer to
CD-4DIOPB Blade on page 4-84
blade.
Table 4-44 CD-4DIOPB LED Indications
Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
19" Chassis 19" Chassis
without CPU
6
Indications. Each LED is listed with its associated
for the location of the LEDs on the
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Issue 4.1
provides the
Networked
x4 Chassis
23 50
Table 4-44
Figure 4-28
Remarks
4 - 85