Honda 2006 Civic Sedan Owner's Manual page 82

System Set-up
Either select Address or Map Input
on the Enter avoid area by screen.
Each choice provides a slightly
different way to locate the approximate
map display for drawing the area you
wish to avoid. After selecting the
choice, a map screen will be displayed.
Use the ZOOM IN/OUT buttons to
select the map scale (available scales
are 1/20, 1/8, and 1/4 mile scales). Use
the joystick to move the crosshairs (red
circle) to the desired start point and
push in the joystick to "set" the start
point. Then move the joystick in a
straight or diagonal direction to
encompass the area to be avoided.
82 Navigation System
NOTE: The maximum size of the
"Avoid area" is 1/4 of the navigation
display screen when the 1/4 mile scale
is selected.
The selected area will be displayed as a
shaded box with an orange border. Push
in on the joystick to set the end point of
the avoided area. To "re-draw" the area,
touch Cancel and repeat the area
selection process. If your selected area
contains a freeway, the system will
prompt you with a pop-up box saying,
"Do you want to avoid freeways?"
Answering "No" allows you to enter a
route through an avoided area on a
freeway, and skip the "Avoid area
caution box" (see Pop-ups and
Disclaimers on page 58).
Say or select Done to return to the
Edit area screen. When you return, the
"Vicinity" field is automatically filled
in by the system. Re-edit the area
"Name" if desired. Select Done on the
Edit avoid area screen to finish
editing. Your new avoided area will
now appear on the "Avoid area" list
screen, and be viewable on the regular
map screen.
NOTE:
• You can select areas to avoid,
however you cannot select roads or
areas that you want the system to use
for routing.
• To ensure that a road is avoided,
make sure to select a portion of the
road that includes at least one
intersection.