Download Print this page

Hitachi CM-N10000 Instructions Manual page 6

Ion cleansing with moisturizing and cooling support device

Advertisement

2. Wash your face and remove make up to make skin clean.
3. Attach a cotton puff to the main body. (Fig.2)
Cotton puff
Protection seal
(1) Remove the protection seal from the head.
The device will not operate unless the protection seal is removed.
(2) Place a cotton puff, and fix it with the ring.
Use a commercially available cotton puff. However, if the cotton puff is too small or
thick may not be attachable.
The ring is directional. Attach it from straight above with the inner lugs aligned with
the head side.
Do not attach the ring in the reverse direction. Be aware that the ring, if pushed with
force, will not be able to be removed.
(3) Remove the ring by pressing the thinner parts on both sides. (Fig.3)
Thinner part
4. Please observe the following so as not to damage your skin when you use the product.
(1) The maximum amount of time allowed for skin care with this device is around
18 minutes once a day in basic mode.
(Avoid use exceeding 5 minutes per day for each Step 1 through 3, and avoid use
exceeding once a day in Step 4.)
Basic mode
"CLEANSING"
<Automatic stop>
Step 1
(approximate 5 minutes)
"MICRO-PAT"
Step 2
(approximate 5 minutes)
Step 3
Step 4
(Preparation for cooling: approximate 1 min. and 30 sec.)
(Operating time: approximate 1 min. and 30 sec.)
(2) Use this device on bare skin after removing makeup.
(3) Do not use this device on the same part of your skin for more than 10 seconds.
(4) Switch the power level between high and low by pressing the level
selector button according to your skin condition.
You can choose "HIGH" or "LOW" as you like, but if your skin tingles, use the
device at the "LOW" level.
If you feel something unusual with your skin, stop using this device and consult a
dermatologist.
Lugs
<Automatic stop>
"MOISTURIZE"
<Automatic stop>
(approximate 5 minutes)
"COOL-AESTHETIC"
<Automatic stop>
Examples of use
Press the mode selector button to set the mode of a desired treatment.
Quick cool-down treatment (required time: approximate 3 minutes)
Step 4 "COOL-AESTHETIC"
If you want to tighten up the pores of your skin or cool down your skin before putting on
makeup, you can just use "COOL-AESTHETIC".
Preparation for cooling will be complete in approximate 90 seconds, and the pores of
your skin will be tightened in approximate 90 seconds. Press the mode selector button to
set "COOL-AESTHETIC".
Quick moisturizing treatment (required time: approximate 5 minutes)
Step 3 "MOISTURIZE"
If you do not have much time in the morning or you need to go out suddenly,
you can just use "MOISTURIZE" . This will moisturize your skin in approximate 5 minutes.
Press the mode selector button to set "MOISTURIZE" .
Pore tighting treatment (required time: approximate 8 minutes)
Step 1 "CLEANSING"
Step 4 "COOL-AESTHETIC"
If you want to remove fine dirt remaining in pores and tighten the pores of your skin,
perform "COOL-AESTHETIC" after "CLEANSING".
The pores of your skin will be cleanly tighten.
After the end of "CLEANSING" mode, press the mode selector button to set
"COOL-AESTHETIC".
Easy moisturizing treatment (required time: approximate 10 minutes)
Step 1 "CLEANSING"
Step 3 "MOISTURIZE"
Before you go out or when you have more time, "MOISTURIZE" after "CLEANSING".
This will moisturize your cleansed skin.
After the end of "CLEANSING", press the mode selector button to set "MOISTURIZE" .
Full treatment course (required time: approximate 13 minutes)
Step 1 "CLEANSING"
Step 3 "MOISTURIZE"
Step 4 "COOL-AESTHETIC"
This treatment is for daily routine.
"MOISTURIZE" after "CLEANSING" to support clean moisturizing of your skin, and
tighten the pores of your skin by the cooling effect of "COOL-AESTHETIC."
After the end of "CLEANSING," press the mode selector button to set "MOISTURIZE."
Recommended full treatment (required time: approximate 18 minutes)
Step 1 "CLEANSING"
Step 2 "MICRO-PAT"
Step 3 "MOISTURIZE"
Step 4 "COOL-AESTHETIC"
This treatment is for daily standard.
After "CLEANSING", loosen up your skin by "MICRO-PAT" to allow moisturizing
ingredients to easily permeate your skin, and give moisturizing care by making
moisturizing ingredients permeate the layer of dead skin by "MOISTURIZE".
In addition, the pores of your skin will be tightened by the cooling effect of
"COOL-AESTHETIC".

Advertisement

loading