Recall Mode; Switch First Ring On/ Off; Change The System Pin - Motorola C5011A User Manual

4. Scroll or
If you choose Select
•
Scroll or to the handset you want then press Select.
•
Scroll or
and press Select.
5. Press to return to standby.
9.5

Recall mode

Recall is useful to access certain network services and PABX /switchboard
services.
The default recall mode preset in the C5010A is suitable for your country
network and therefore you should not need to change it.
NOTE
The use of the C5010A cannot be guaranteed on all PABX.
1. Press Menu, scroll to Settings and press Select.
2. Scroll to Set
3. Scroll to Recall
4. Scroll or
5. Press to return to standby.
9.6

Switch first ring on/ off

If you have subscribed to your network's Caller ID service, the C5010A will
not ring until the caller information has been received and displayed.
However, if you want your handset to ring without waiting for the caller
information to be displayed, set First Ring to On. Please note that this will
mean that the first ring you hear will be the default ringtone. It will change to
the ringtone that you have set once the caller information is displayed.
1. Press Menu, scroll to Settings and press Select.
2. Scroll to Set
3. Scroll to First
4. Scroll or to On or Off then press Select to confirm.
5. Press to return to standby.
9.7

Change the System PIN

The System PIN is required when changing certain settings and for
registration / de-registration. T he default setting is 0000. Y ou can change this
to your own preferred number (up to 8 digits).
When you enter a PIN, the digits are shown as ****.
to All Handsets or Select
Handset, all available handsets are displayed.
to the number of rings that you want to set: 2, 4 or 6
Base and press Select.
Mode and press Select.
to Recall 1 or Recall 2 and press Select.
Base and press Select.
Ring and press Select.
Handset then press Select.
41
Rings
Base settings