Preparations - Panasonic WV-SPW631LT Installation Manual

Preparations

• The camera mount bracket (accessory) can be directly mounted on the wall using a junction
box (locally procured) embedded in the wall, or a wall with a cable access hole.
• The screws that secure the camera mount bracket on a wall are not supplied. Prepare the
screws according to the material, structure, strength and other factors of the mounting area
and the total weight of objects to be mounted.
IMPORTANT:
• Prepare the mounting screws according to the material of the area where the camera mount
bracket and the adapter box are to be installed. In this case, wood screws and nails should not
be used. Recommended tightening torque M4: 1.57 N·m {1.16 lbf·ft}
• Required pull-out capacity of a single screw/bolt is 196 N {44.06 lbf} or more.
• If a wall or ceiling board such as plaster board is too weak to support the total weight, the area
shall be sufficiently reinforced.
18