Panasonic WV-SPW631LT Installation Manual page 15

Radio disturbance
When this product is used near TV/radio anten-
na, strong electric field or magnetic field (near a
motor, a transformer or a power line), images
may be distorted and noise sound may be pro-
duced.
Take notice of humidity.
Install this product when the humidity is low. If
this product is installed during rainfall or at a
high humidity, the inside may be exposed to
moisture and the front cover may become
foggy.
Heater unit
This product is equipped with an internal heater
unit for use in cold climates. The heater unit turns
on automatically when the temperature inside the
product drops below 0 °C {32 °F}. However, in
an extremely low-temperature environment below
–30 °C {–22 °F}, snow and frost may not be
defrosted from the front cover. When using the
product in cold climates, take notice of the ambi-
ent and internal temperatures of the product.
When this product is installed and operated in
low temperatures below –10 °C {14 °F}, normal
images may not be obtained immediately after
startup. In such a case, wait around 2 hours or
more, and turn on the power again.
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Router
When connecting this product to the Internet,
use a broadband router with the port forward-
ing function (NAT, IP masquerade).
Refer to the Operating Instructions (included in
the CD-ROM) for further information about the
port forwarding function.
Time & date setting
It is necessary to set the time & date before put-
ting this product into operation. Refer to the
Operating Instructions on the provided CD-ROM
for descriptions of how to perform the settings.
LAN cable
Shielded (STP*) LAN cables must be used with
this unit to ensure compliance with EMC stan-
dards.
* For Europe
15