Motorola MOSCAD Owner's Manual page 3

Connection to MOSCAD Unit
The following figure describes the connection of the external Ethernet unit to the MOSCAD CPU module.
Note that the number shown next to an item is the kit number.
Ethernet Unit
A A
Suppression
Core (Fair-Rite)*
To LAN
* Install Suppression Core
(Fair-Rite) P.N 044316415
on cable, used for LAN connection.
** Use shielded cable for LAN connection
Connection of the External Ethernet Unit to the MOSCAD CPU Module
Mounting the Ethernet Unit in the MOSCAD Box
The following figures show the mount locations of the Ethernet unit on MOSCAD brackets.
Mount Locations of the Ethernet Unit on MOSCAD brackets
12VDC from the AUX
outlet in MOSCAD
Power Supply
FKN4090A
Ethernet Unit
FKN5953A
3
To LAN**
Use Port 1 or Port 2 -
RS232 connectors
Use Port 3 when an
internal programmable
RS232 board
(FRN5724A) is
installed