Example: To enter "Anne" in Latin Mode.
2 a [E] a [G] a 6 a 6 a [E] a 6 a 6 a [E] a 3 a 3
R To switch between uppercase and lowercase, press
KX-TPA60:
KX-TPA65:
R To enter a character located on the same dialing key as the previous character, move the cursor by
pressing the Navigator Key [E], then enter the desired character.
R To edit an entered character
1. Press [F] or [E] to highlight the character.
2. Delete the character.
KX-TPA60:
/
/[XFER/CLR]
KX-TPA65:
/
/[TRANSFER]
3. Enter the correct character.
R To clear an entire line.
KX-TPA60:
/
/[XFER/CLR]
KX-TPA65:
Press and hold
R To move the cursor, press the Navigator Key [F], [E], [D] or [C].
Power On/Off (KX-TPA60 only)
To turn the power of the handset on or off, press and hold
Power Save Mode
Power Save Mode turns off the ringer, LCD backlight, and/or key backlight automatically after a set
number of seconds have passed while receiving a call. For details about adjusting power save mode
settings, see "Incoming Option", Page 91.
Basic Operation
Basic operations for the KX-TPA65 are described here.
Going off- and on-hook
There are several ways to go off-hook and on-hook:
R Using the corded handset
R Using the
/[SP-PHONE],
R Using the soft key
/
/[TRANSFER] for more than 1 second.
/[CANCEL] key
Before Operating the Telephones
.
45