Digital Radio Basic Operation - Kenwood DNX7150DAB Instruction Manual

Return to the Top page
Radio Operation

Digital Radio Basic Operation

(DNX7150DAB, DNX715WDAB, DNX4150DAB only)
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
mode (P.107).
Control screen
2
5
1 Service name display
Displays the Service name.
2 Information list
Displays information about the current music being played: Channel Name, Artist Name, Song Title,
Content Info, Category Name, Channel Description, Similar Channels
3 Function bar
Various functions can be performed by using keys in this area. For details on the menu, see
bar (P.61).
4 Preset key
Recalls the memorized service.
Touching on the screen or flicking the screen to left will display the Preset list. Touching again or
flicking to right will close the list.
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see
6 Artwork area
The picture data is displayed if available from current content.
Touch to switch between the Control and Information screen.
7 Preset list
Recalls the memorized service. When touched for 2 seconds, stores the current service in memory.
60 60
3
Function panel (P.61).
Control list screen
4 6
Switching the operation
1
7
Function