Zone Control - Kenwood DNX7150DAB Instruction Manual

Zone Control

You can select different sources for both
front and rear positions in the vehicle.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Zone Control].
Zone Control screen appears.
4
Touch [Dual Zone].
5
Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
<MENU> button/
[∞], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost
– Equalizer Control/Sound Effect/Listening
(P.99, 102, 104)
Position
– DSP Bypass Control/Speaker Setup/Car Type
(P.97, 95, 96)
Setup
• Different sources from iPod/iPhone (apps) cannot
be set as front source and rear source separately.
Only one source (app) can be set as front and
rear sources.
Return to the Top page
Controlling Audio
(P.98)
101