Registering For Insight Online Direct Connect - HP ProLiant Gen9 Servers User Manual

Registering for Insight Online direct connect

Use this procedure to register an HP ProLiant server for Insight Online direct connect remote support.
When you register for Insight Online direct connect, you must complete steps in both Intelligent
Provisioning and the Insight Online portal.
1. Verify that the server meets the prerequisites for using the Insight Remote Support solution.
For more information, see
2. Select Register this server directly to HP.
The page refreshes to show the Insight Online direct connect registration options.
3. Enter your HP Passport credentials in the HP Passport User ID and HP Passport Password
boxes.
IMPORTANT:
used during the HP Passport registration process. If you changed your user ID in the HP Support
Center, be sure to enter your user ID and not your email address.
4. Optional: Enter the following information if the HP ProLiant server uses a web proxy server to
access the Internet:
Web Proxy Server
Web Proxy Port
Web Proxy Username
Web Proxy Password
5. Click Register.
Clicking Register is Step 1 of a two-step registration process. Step 2 is completed in Insight
Online.
By registering, you agree to send registration, service events, configuration, and Active Health
System data to HP. For more information about the type of data collected, see
by Insight Remote Support" (page
14 Completing initial configuration and registration tasks
"Prerequisites" (page
In most cases, your HP Passport user ID is the same as the email address you
12). All data collected and sent to HP will be managed
13).
"Data collected