General Settings - Cisco LINKSYS DMP100 Quick Installation Manual

Wireless Home Audio
Wi-Fi Protected Setup™ Discovery
connect to your router using the Wi-Fi Protected Setup™
button on your router.
Advanced This option is used for IP configuration. A
dynamic or static IP address can be selected here.
Dynamic IP The dynamic IP option should be selected
if your router or network connection automatically
provides an IP address to devices on the network.
Once this option is selected, the Details screen can be
used to verify that an IP address has been obtained.
Static IP Selecting Static IP will prompt you to enter
the IP address. To enter the IP address using the remote
control, remove the existing address by using the left
arrow on the 5-Way Button. Numbers can be manually
entered using the keypad or arrow up and down on the
5-Way Button to scroll through the number selections.
To move to the next digit, use the right arrow on the
5-Way Button. To enter a dot (.) or period in the IP
address, press the zero (0) button twice.
Details This option displays the current network
connection settings including the wireless network name,
wireless security type, DHCP status, IP address, subnet
mask, gateway, and DNS information.
Zones and Libraries
Rename Zone This option is used to rename a device
with a name that will allow you to know where it is located
in your home. This makes it much easier to select which
areas to play music to or link.
Rediscover If one of the Wireless Home Audio devices or
one of your libraries on the network is not appearing, use
this option to rescan for any devices or libraries that are
not showing up.
Player/Wireless-N Music Extender
This option is used to
Using the Controller with Your Player

General Settings

The General option allows you to configure general
devices settings for your Director.
Date/Time
Auto update When this option is enabled, the date and
time settings are automatically updated via the Internet.
Set Time A series of screens will appear allowing you to
manually enter the month, day, year, and time.
Set Time Zone Select your local time zone.
Daylight saving This option should be selected when
observing daylight saving time.
Time Format This allows you to select a 12 hour or 24 hour
time format. The 12 hour format is the default setting.
Date Format Allows you to specify the order that the day,
month, and year are displayed.
36