AL-C300 Series
User's Guide
B
Be sure to lift the printer by the correct positions
as shown below.
c
Important:
When moving the printer, always keep it horizontal.
For long distances
Before you move the printer, prepare the location where
you are going to place it.
See the following sections.
❏
"Setting up the printer" on page 6
❏
"Finding the place for the printer" on page 7
Repacking the printer
If you need to transport your printer for long distances,
carefully repack it using the original box and packing
materials.
A
Turn off the printer and remove the following
items:
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Installed options
B
Attach the protective materials onto the printer,
then repack the printer in its original box.
Be sure to immobilize the photoconductor units
with the protective materials that were removed
when the printer was set up. Do the installation
procedure in reverse.
Troubleshooting
c
Important:
When moving the printer, always keep it horizontal.
Installing Options
Optional paper cassette unit
For details about the paper types and sizes that you can
use with the optional paper cassette unit, see
Paper and Capacities" on page
The available optional paper cassette units are as
follows:
❏ 500-Sheet Paper Cassette Unit × 1
Handling precautions
Always pay attention to the following handling
precautions before installing the option:
Be sure to lift the printer from the positions shown
below.
!
Caution:
If you lift the printer incorrectly, you could drop it and
cause injury.
Installing the optional paper cassette
unit
A
Turn the printer off and unplug the power cord
and interface cable.
c
Important:
Make sure to unplug the power cord from the printer to
prevent getting an electrical shock.
84
"Available
37.