Panasonic X-Plus Series SP-DRH04 User Manual

Panasonic X-Plus Series SP-DRH04 User Manual

H.264 video compression 960h digital video recorder
Table of Contents

Advertisement

INSTRUCTION MANUAL
(X-Plus Series _Ver. 1.0_131114)
H.264 Video Compression
960H Digital Video Recorder
User Guide
About this user guide
Before installing and using this unit, please read this user guide carefully.
.
Be sure to keep it handy for later reference

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic X-Plus Series SP-DRH04

  • Page 1 INSTRUCTION MANUAL (X-Plus Series _Ver. 1.0_131114) H.264 Video Compression 960H Digital Video Recorder User Guide About this user guide Before installing and using this unit, please read this user guide carefully. Be sure to keep it handy for later reference...
  • Page 2: Safety Precautions

    Safety Precautions Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. This symbol indicates the presence of uninsulated ”dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 3 These precautions must be followed for safety reasons. Warning  Do not uses if the unit emits smoke, strange sounds are heard, or odor is emitted.  Make sure the power cable is not damaged.  Make sure there is no dust accumulation on the power plug or the outlet. ...
  • Page 4: Product Components

    Product Components The package contains the main unit and its components as specified below. When you purchase the unit, please check to ensure the components specified below are included. DVR Set (4CH) DVR Set (8 & 16CH) DVD-RW (option for 8 & 16CH DVR)) Client Software CD Remote Control Battery1.5V (AAA x 2EA)
  • Page 5 Mounting the HDD or DVDRW (for only 8&16CH model) 1. Before installing bracket and screws onto 2. After installing bracket and screws onto HDD. 3. Installation HDD and Bracket onto base 4. Installation HDD and Bracket onto base case (Inside) case (Outside) 5.
  • Page 6: Compatible Hdd Models

    Basic function of the MOUSE ① Left button: SELECT function ② Wheel: MOVEMENT function on a drop-down menu Compatible HDD Models Company Model Size SATA Type BUFFER ST2000VM003 2 TB SATA 3 5900 RPM 64 MB ST2000VM002 2 TB SATA 2 5900 RPM 64 MB ST2000DL003(barracuda green)
  • Page 7 WD20EURS-63SPKY0 2 TB SATA 2 5400 RPM 64 MB WD5000AAKX-00ERMAO 500 GB SATA 3 7200 RPM 16 MB WD5000AVCS-632DY1 500 GB SATA 2 5400 RPM 32 MB WD10EZEX-00RKKAO 1 TB SATA 3 7200 RPM 64 MB WD20EARS 2 TB SATA 2 5900 RPM 64 MB WD20EARX(00PASB0)
  • Page 8: Specifications

    Specifications MODEL SP-DRH04 SP-DRH08 SP-DRH16 Number of 16CH Channels (650/700TVL) (650/700TVL) (650/700TVL) Input Signal Format NTSC/PAL Video Main Monitor VGA and HDMI (1920x1080) Output Sub Monitor CVBS or SPOT CVBS and SPOT Input & Output 4 Line Input & 1 Line Output Audio Audio Codec G.711...
  • Page 9 NTP (Network Time Protocol) S.M.A.R.T Internal Beep Multi-Language e-mail Notification 3G/4G Mobile iPhone / iPad / Android Phone & Tab Web Viewer Windows (IE, Chrome, Firefox, Safari) Network Access PC Client Single / Multi Client Remote Setup and Upgrade Power Power Supply Voltage DC 12V 3A DC 12V 5A...
  • Page 10: Table Of Contents

    Table of Contents Main Features ......................13 Name, Function and Connection ................14 2-1. Front Panel ........................... 14 2-2. Rear Panel ........................... 17 2-3. Remote control ..........................19 Setting up the DVR ..................... 20 3-1. Setup – Main Screen ........................20 3-2.
  • Page 11 4-2-7. Archive Search .......................... 50 4-2-8. Log Search ..........................50 4-3. Play mode ............................ 51 5. PTZ Control ........................52 6. Back up ......................... 54 6-1. Still Image backup onto USB flash memory .................. 54 6-2. Video backup onto USB flash memory ..................55 6-3.
  • Page 12 9-8-6. AVI Backup during playback ................91 10. Network – By an web-browser viewer ................93 APPENDIX: How to connect network................. 96 How to set IP address of the DVR and open TCP port of the router? ..........96 How to access DVR from Remote PC? ..................98 C.
  • Page 13: Main Features

    1. Main Features  H.264 Video compression  Reliable file system  Spot output (Live and Event Pop-up)  HDMI Video output  4Channel audio recording  Individual channel operation  Motion detection  Automatic video input and video loss detection ...
  • Page 14: Name, Function And Connection

     Instant and convenient backup via USB flash drive, network or DVD-RW (for 8&16CH model)  Exclusive file format backup  AVI backup  Various ways of network access via Network client software, Web-viewer, CMS, UMS(Multi-site monitoring software) and Mobile Viewer 2.
  • Page 15 ⑫ USB PORT: To connect USB Thumb drive to backup data. ⑬ HDD: The indicator blinks during recording and playback. ⑭ POWER: The indicator blinks when the AC adaptor is connected. Direction, Selection & Escape buttons ⓐ Press to move up the menu in Setup mode ⓑ...
  • Page 16 Channel keys. For channel 10, press the 0 key. For channel 11, press the +10 and 1 key. For channel 16, press the +10 and 6 key. Press to rewind the footage in playback mode. Press to select audio mode such as SINGLE and MUTE. MUTE- All of 4 channels.
  • Page 17: Rear Panel

    terminal. OPEN To open and close the insert tray, press the button. /CLOSE DVD drive To save video, insert a DVD-R media 2-2. Rear Panel Figure 2.1.3. Rear panel (SP-DRH04) Connection Purpose VIDEO IN connectors for video input. (NTSC/PAL) CVBS Video output termal or Spot out terminal AUDIO IN 4 connectors for audio input.
  • Page 18 Connection Purpose connectors for video input. (NTSC/PAL) VIDEO IN Video output termal CVBS SPOT Spot out terminal AUDIO IN 4 connectors for audio input. AUDIO OUT 1 connector for audio output. VGA OUT Connector for VGA monitor. HDMI OUT HDMI out terminal. ETHERNET RJ-45 connector for LAN connection.
  • Page 19: Remote Control

    SENSOR IN 4 connectors for sensor device connection. ALARM OUT 1 connector for alarm device connection. Provides simple On/Off switching by using relay. 0.5A/125V, 1A/30V RS-485 RS-485 control terminal POWER SOCKET Connect DC12V 5A Adaptor USB Port To archive still-image or video into a USB memory or upgrade firmware with USB memory stick, connect a USB memory to the USB terminal.
  • Page 20: Setting Up The Dvr

    ⑨ ESC:  During setup – To retun to the preivous menu screen.  During Playback – To exit playback mode  System lock – To lock a system when pressing ESC button for 5 seconds.  System unlock – To unlock a system when pressing ESC button for 5 seconds. ⑩...
  • Page 21 Then password input screen will be displayed. User can select a password by pressing a small square box next to a password input box. The factory default password is 1111. It is highly recommended to assign a new password to protect the system. User can assign a new password in SECURITY setup menu. CONTROL BAR AUTO HIDE: Set to hide automatically or display continuously a control bar on the bottom side in a Live mode.
  • Page 22 – CONTROLLER & PTZ CONTROLLER - SPEED - ID CHANNEL - CAMERA - SPEED - ID – CHANNEL MOTION ZONE MOTION SENSITIVITY PRIVACY ZONE – KEY TONE – REMOTE CONTROLLER ID – SENSOR TYPE VIDEO INPUT TRIMMING  STORAGE – OVERWRITE –...
  • Page 23 – NETWORK LIVE AUTHORITY  NETWORK – PORT – NETWORK AUDIO PORT – WEB PORT – NETWORK TYPE (DHCP, STATIC) SUBNET MASK GATEWAY DNS(PRIMARY) DNS(SECONDARY) – DDNS DDNS SERVER 1 DDNS SERVER 2 DDNS SERVER 3 – NETWORK STREAM RESOLUTION FRAME RATE QUALITY USE MOBILE...
  • Page 24: Setup - Display Mode

    3-2. Setup – Display Mode Press the SETUP button and select DISPLAY. Then, the DISPLAY menu displays as picture below. ◀ ▲ ▶ ▼ Navigate through the menu items using the mouse or the control button ( ) on the remote control and change the value of the menu item.
  • Page 25 ◀ ▲ ▶ ▼ control button ( ) on the remote control. Press the right square button to change the setting value of all channels at once. Press SEL button to change the setting value of all channels at once. Press a right button of the mouse control just one time if you want to select an item and please do a double-click if you want to change the value.
  • Page 26: Setup - Recording Mode

    3-3. Setup – Recording Mode Press the SETUP button and select RECORD icon. Then, the RECORD menu is displayed as picture below. ◀ ▲ ▶ ▼ Navigate through the menu items using the mouse or the control button ( ) on the remote control and change the value of the menu item.
  • Page 27: Recording Schedules

    values from each channel cannot exceed the maximum frame rates for a specific recording resolution. QUALITY Select the recording quality for the specified channel. Options are: LEVEL 1 (Low), 2, 3, 4 and 5 (High) RECORDING Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule or Disable.
  • Page 28: Setup - Device Mode

    Figure 3.3.2. Schedule recording setup screen 3-4. Setup – Device Mode Press the SETUP button and enter the password. Select DEVICE icon and press SEL button to enter the setup menu item. Then, the device menu is displayed as picture below. Navigate through the menu items ◀...
  • Page 29: Alarm-Out

    Select specified channel for motion zone setup. CHANNEL MOTION ZONE Select either Full Zone or Partial Zone for motion sensing. MOTION SENSITIVITY Set the motion sensitivity for the specified channel. Control the motion sensitivity from 1(L) to 9(H). PRIVACY ZONE Select the privacy zone through mouse drag (Left-up to right down).
  • Page 30: Motion Zone Setup

    ② Press the Controller & PTZ menu button. Then PTZ menu screen is displayed. Figure 3.4.4. Controller & PTZ Setup Screen Note: For speed dome cameras that support RS-485, connect them directly to the RS-485 port. If the camera is controlled with RS-232C, use an RS-485 to RS-232C signal converter. On the PTZ control setup screen, you can select or set the protocol type of the camera that is the same as the one installed on the site.
  • Page 31: Setup - Storage Mode

    To escape from the motion zone setting mode, user has to click the right mouse button after finishing its setup. Figure 3.4.5. Motion Zone selection screen 3-5. Setup – Storage Mode Press the SETUP button and select STORAGE icon. Then, the STORAGE menu is displayed as picture ◀...
  • Page 32 DISK FORMAT You will have an option YES or NO for the hard drive format. Caution: We recommend that you archive any data that you may need in the future before you format the hard drive. DISK INFO Hard disk drive information DETAIL HELP RECORDING LIMIT...
  • Page 33: Setup - System Mode

    RECORDING LIMIT DAYS Set the recording limit days.(1- 90 days) When setting to 1 day, the data will remove by the hour. 3-6. Setup – System Mode Press the SETUP button and select SYSTEM icon. Then, the SYSTEM menu is displayed as picture below. ◀...
  • Page 34 and DDNS status.) ◀ ▲ ▶ LANGUAGE Select the display language using the mouse or the control button ( ▼ ) on the remote control. Once a language is selected, the display language changes. (English, Korean, Japanese, SP Chinese, TR Chinese, Czech, Finnish, French, Greek, Italian, Dutch, Norse, Russian, Spanish, Turkish, Polish, Danish, Croatian, German, Portuguese, Farsi and so on) ◀...
  • Page 35 ◀ ▲ ▶ ▼ setting value using the control button ( ) and press the ESC button to return to SET DATE & TIME setup menu. CAUTION: - Do not set the start time to 23:00 for DLS. - DLS can’t be applied if the date of BEGIN and END is the same. Enable/Disable remote access through network client software.
  • Page 36 SERVER TYPE - Select Email account from Gmail, Hotmail, AOL, Yahoo, or manual configuration. MAIL SERVER- Outgoing mail server address. MAIL PORT- 1 ~ 99 (Allows the user to set E-MAIL PORT) SECURE OPTION- NONE, SSL, TLS (Allows the user to select E-MAIL SECURE OPTION) ID –...
  • Page 37: Setup - Security Mode

    EVENT AND NOTIFICATION HEALTH CHECK- Select Yes or No. Yes is sending an email or not RESTART- Select Yes or No. Yes is sending an email or not SHUTDOWN- Select Yes or No. Yes is sending an email or not PANIC RECORD- Select Yes or No.
  • Page 38 Blank: Does not ask for a password when the given function is selected for all users. The default value is that there is the password check. ADMIN, NETOWRK, USER1, USER2, USER3: V check: It means the user can access to the function. Blank: It means the user cannot access to the function.
  • Page 39: Setup - Network Mode

    When user set this function, they can see a user login window. Then, user can select one of user types ◀ ▲ ▶ ▼ (ADMIN, USER1, USER2, USER3) using the mouse or the control button ( ) on the remote control.
  • Page 40: Port, Network Audio Port And Web Port

    NETWORK TYPE Select a type of network connection. DHCP DVR automatically get IP varying from time to time from network and does not therefore need to be set. STATIC Assigned to an Internet service provider (ISP) to be its permanent address on the Internet.
  • Page 41: Static

    3-8-2-2. STATIC 1. For the use of fixed IP. (See your network administrator if you do not have this information) 2. When DVR is installed in IP sharer that is connected with ADSL, a user can assign fixed IP to DVR from IP sharer itself using “DMZ”...
  • Page 42: Setup - Config Mode

    rate are sending when only one user connects to the one channel mode via network. Figure 3.8.4. Network setup screen – Network Stream 3-9. Setup - CONFIG Mode Press the SETUP button and select CONFIG icon. Then, the CONFIG menu is displayed as picture below. ◀...
  • Page 43 LOAD SETUP User can upload the configuration of DVR to another DVR using the USB FROM A USB Memory stick. Put the USB stick on the front panel and press the button to start the loading process. LOAD DEFAULT Press the button to reset the system to the default settings. (The follow settings such as Language, DVR ID, Security User Authentication, Security User P/W, Date format, DLS settings, Network settings, HDD overwrite, Limit recording, HDD serial number and HDD...
  • Page 44: Quick Setup

    3-10. Quick Setup Press the SETUP button and select QUICK SETUP icon. Then, the QUICK SETUP menu is displayed as ◀ ▲ ▶ ▼ picture below. Navigate through the menu items using the mouse or the control button ( ) on the remote control and change the value of the menu item.
  • Page 45: Saving Setup

    3-11. Saving Setup To preserve the setup values that you have changed, select YES. Figure 3.11.1. SAVE SETUP screen 4. Live, Search and Playback 4-1. Live Viewing Screen In the Live screen, video inputs from the cameras are displayed as they are configured in the Display Setup screen.
  • Page 46 Setup button. Click this button to go to a setup menu. Click the AUDIO icon when you want to activate the audio using a mouse Search button. Click this button to go to a search menu. Backup button for capturing a still image in Live mode. PTZ button.
  • Page 47: Search Screen

    Indicates that alarm is set. To set the alarm function, press the Alarm button on the front panel. Indicates that alarm output is activated. Event indicator. When there is an event (motion recording, video loss, HDD fail, S.M.A.R.T), this icon will be highlighted bright. Indicates that a network client is connected to the DVR.
  • Page 48: Time-Line Search

    1. When the Quick Search menu is selected, the user can see a calendar, which displays recorded dates with highlights. Select a specific date on a calendar. 2. Select a channel from Channel Selection Screen. Then, 24 Hourly Thumbnail Search screen displays. 3.
  • Page 49: Event Search

    When it clicks a Timeline menu, user can see a calendar which has recording data. Select a specific date and time. Use a drag-and-drop function of the mouse control. User can select a specific minutes using a button in the above red box. Press a PLAY button after setting a specific time. Press the PREV to return to the SEARCH window.
  • Page 50: Go To First Time

    4-2-4. Go To First Time You can access from the oldest recorded data on the DVR hard drive by selecting GO TO FIRST TIME on the SEARCH window. Press the PREV to return to the SEARCH window. 4-2-5. Go To Last Time You can access from the last minute recorded data on the DVR hard drive by selecting GO TO LAST TME on the SEARCH window.
  • Page 51: Play Mode

    Figure 4.2.5. Log Search Screen When it clicks a Log menu, user can see a calendar which has recording data. Select a specific date and press NEXT button. Then user can see all log data. Press SAVE button to save the data and then the data is saved to text file format.
  • Page 52: Ptz Control

    Button Description Return to the previous menu screen, search window, or exit from the Menu Press to rewind the footage at x1, x2, x4 and more speed. Reverse ◀◀ playback speed is shown as -x1, -x2, -x4 and more speed at the bottom right of the screen.
  • Page 53 Table 5.1. Button Functions in PTZ Control Item Description Initialize the PTZ settings of the selected camera. INITIALIZE PAN / TILT Select PAN/TILT using the mouse or the control button ◀ ▲ ▶ ▼ ) and press SEL button on the remote control.
  • Page 54: Back Up

     Preset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 and PMA-200. (Select it in the NAME of PTZ setup menu) Table 5.2. Description of RS-485 port Data + Data - 6. Back up 6-1. Still Image backup onto USB flash memory Still images can be captured and archived onto the USB stick or hard drive in live mode or while playing back recorded video.
  • Page 55: Video Backup Onto Usb Flash Memory

    2. When you press BACKUP button, the archiving screen will display as Figure 6.1.1. 3. Once you press Backup button, the system will start to archive the data to the selected media. Figure 6.1.1. Still Image Archiving and Backup Screen NOTICE For a backup using a USB stick, a format of the USB stick has to be set to FAT32.
  • Page 56: Playback Of Backup Video

    2. Once you have selected the date, press NEXT button to open the list of stored data. ◀ ▲ ▶ ▼ 3. Use the mouse or the control button ( ) on the remote control to scroll through the on-screen listings.
  • Page 57: Upgrading Firmware

     AVI format: It can be played back by Window Media Player™ or other media player that is compatible with AVI format video. 7. Upgrading Firmware In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory stick.
  • Page 58 2. You can see the following message when pressing the software upgrade menu after putting the USB memory stick on the system. 3. You can see the following message when pressing the scan button. Please check the current firmware version and the firmware version which you want to upgrade. The system will upgrade automatically when pressing the upgrade button.
  • Page 59 Remote Firmware Upgrade User can upgrade the firmware via Network as follows. 1. Go to the Remote Setup menu on the UMS Single, UMS Multi or Web Viewer. 2. Press the password for admin. Just admin is possible to connect to the remote setup menu.
  • Page 60 3. Go to the Remote Upgrade menu. Then, you can see the current F/W version as follows. To upgrade a new F/W, insert the F/W in your PC and press the UPGRADE button. 4. Then, you can see the following progress bar and it would be taken around 150 seconds to upgrade. 5.
  • Page 61: Network Access Using The Exclusive Network Viewer, Ums Single

    8. Network access using the Exclusive network viewer, UMS single The DVR provides a live remote monitoring feature. Remote monitoring requires installation of the network viewer on your PC. NOTICE In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth network it is recommended that only one user access the DVR at a time.
  • Page 62: Live Monitoring Mode And Functions

    8-3. Live monitoring mode and functions. Button Function Description Displays the current date and time. DATE & TIME CONNECT/DISCONNECT Connect/disconnect network connection. SEARCH Switches the live mode to search mode. DISPLAY MODE Select a channel and screen display mode. Control the PAN/TILT/ZOOM/FOCUS PAN/TILT/ZOOM/ FOCUS features on the remote camera.
  • Page 63 PRESET SETUP Display the setup screen of the network viewer. ALARM The ON/OFF button of the alarm output of the DVR. When an alarm of the DVR is output, this button becomes Red. HDD USAGE DVR HDD storage Indicator. Shows the transferred frames and NETWORK BANDWIDTH network bandwidth.
  • Page 64: Bi Directional Audio

    Image capture of live screen Still-image of live screen can be captured and saved as BMP or JPEG file. 1. Click the channel to be captured. Then the channel screen is surrounded with a red line. 2. Click the CAPTURE button. Then the IMAGE CAPTURE dialog is displayed. 3.
  • Page 65 Button Function Description Displays the recording time of the data DATE & TIME selected on the time bar at the bottom of the main user interface. DISCONNECT Disconnect network connection.. Switches the search mode to live mode. LIVE CAPTURE Capture a still image from live screen. MARK IN Set the start time for video backup.
  • Page 66 Searching and playing video in the remote DVR Video recorded in the remote DVR or Video recorded on the PC can be searched and played back. 1. Connect the network to the remote DVR and press SEARCH button. Then the mode is changed from the live mode to the search mode.
  • Page 67: Pc System Configuration

    3. Drag the slid on the time scale and drop to the end time for video backup and press the MARK OUT button. Then the marked time is displayed in dark green. 4. AVI Backup dialog is displayed. Click the OK button. Then the marked video is backed up. ...
  • Page 68  Security Option: Set a password for security options. When you access any of the selected functions, you will need to enter the password.  Save Path: Specify the location to record for backup and still image capture.  Automatic reconnection: If a user selects this function, the client S/W will automatically try to connect to the previously connected IP address if the network connection is lost.
  • Page 69  LOG – Select to save event log into ‘log file’.  ICON – Select to display the event on live video. EVENT LIST – Select to show the event in the ‘Event List” window of live mode.  Search and check the recorded log data. Setting Record Set the recording conditions and select channels to record.
  • Page 70: Network Access Using The Exclusive Network Viewer, Ums Multi

    9. Network access using the Exclusive network viewer, UMS multi 9-1. Overview The UMS Multi-Client is a multiple site monitoring client software with; video, audio, and alarm signals from the DVRs over networks. The UMS Multi-Client does not limit the number of DVR units to register. The program displays to up 256 live videos on one display and even playback videos window on the same or another display monitor.
  • Page 71 2. Select a destination folder and click “Next”. 3. Select the program folder and click “Next”. 4. The setup status screen is displayed. 5. After the installation is completed, “UMS Multi Client” icon displays on the desktop screen.
  • Page 72: Live Window

    9-4. Live Window When installation is completed, double click the “UMS Multi Client” icon on your desktop to start the program. 9-4-1. Main user interface 9-4-2. Control buttons Button Description Click this icon to run a playback window to search and play videos that are recorded in local PC.
  • Page 73: Search And Playback Window

    Click this icon to connect the selected site/sites. CONNECT Click this icon to disconnect the selected site/sites. DISCONNECT Click this icon to setup configuration of UMS MULTI CLIENT. SETUP Click this icon to capture a still image CAPTURE EVENT LIST Click this icon to play/pause live video.
  • Page 74: Main Control Panel

    9-5-2. Main control panel Button Description Click this icon to run a playback window to search and play videos that are recorded in local PC. LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in remote DVR. REMOTE PLAYBACK Directory window shows site/sites that are pre-registered.
  • Page 75 Click this icon to capture a still image. CAPTURE EVENT LIST Click this icon to set the beginning time for backup of the MARK IN recorded video in AVI format. Click this icon to set the ending time for backup of the recorded MARK OUT video in AVI format.
  • Page 76: Setup Of Ums Multi Client

    9-6. Setup of UMS Multi Client Click the setup icon to setup the configuration of UMS Multi Client software. The Setup window displays. 9-6-1. General 9-6-1-1. Security Option: Set a password for security options. Select security options and set a password. Then when you access any of selected functions, you need to enter the password.
  • Page 77: Record

    9-6-2-1. Archiving Event Log: Specify the location to save event logs and select event to archive. 9-6-2-2. Archiving Event Log: Event log can be searched from selected time. 9-6-3. Record 9-6-3-1. Record setup: You can set the recording conditions for Always, Event, or Auto record. And you can also select target DVR/DVRs and channel/channels.
  • Page 78: Osd

    9-6-4. OSD You can select the OSD to be display 9-6-5. Language You can select a language to be display. 9-6-6. About “About” provides network client version information.
  • Page 79: Remote Setup

    9-7. Remote Setup The menu settings for the DVR unit can be set from a PC, via network. Put the cursor of the mouse on the channel which is connected to the site and press the right. Then the following window is displayed. Select the Remote Setup. Then the setup window is displayed as follows to check the password for admin.
  • Page 80 9-7-1. Display User can set the value on this remote setup page. After setting the value, please press the APPLY button. Then the value would be applied to the system without the system rebooting. RELOAD button is used when user want to bring the value in the system. 9-7-2.
  • Page 81 9-7-3. DEVICE...
  • Page 82 9-7-4. STORAGE 9-7-5. SYSTEM...
  • Page 83 9-7-6. SECURITY 9-7-7. NETWORK...
  • Page 84: Operation

    9-7-8. UPGRADE Please refer to page 54 for the Remote Upgrade. 9-7-9. INFORMATION 9-8. Operation 9-8-1. Addition, Delete, and modify of DVR sites 9-8-1-1. Addition of sites 1. Click SITE ADDITION button. And then the following window displays. o Site Name: Input a name that properly describes a site. o Site Address: Input IP address (Public IP address of a router that DVR is connected.) or Domain name that is registered at www.bestddns.com...
  • Page 85 9-8-1-2. Delete of sites 1. Select the site/sites to delete from the directory window. 2. Click SITE DELETE button. And then the selected site/sites is/are deleted. 9-8-1-3. Modify of sites 1. Select the site/sites to modify from the directory window. 2.
  • Page 86: Connect And Disconnect

    3. Click MODIFY button. And then the modified information is applied. 9-8-2. Connect and Disconnect 9-8-2-1. Connect 1. Select site/sites to connect from the directory window.
  • Page 87 2. Click CONNECT button, and then site/sites displays/display as connected. 9-8-2-2. Disconnect 1. Select site/sites to disconnect from the directory window. 2. Click DISCONNECT button, and then selected site/sites disconnected.
  • Page 88: Still-Image Capture During Live

    9-8-3. Still-image capture during Live 1. Double-click a channel to capture from the display screen. (Otherwise all channels will be captured.). 2. Click CAPTURE button. And then a Capture window displays. 3. Set Save path, File Name, and File Format. And then click OK button. 4.
  • Page 89: Local Playback And Remote Playback

    3. Select Disk and set the values. 4. Click RECORD ON button. And the color of button is changed. 5. Live video data is recorded as set in Record and Disk setup. These video data can be searched and play-backed with Local Playback. 9-8-5.
  • Page 90 2. Select site/sites to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and slide window. 4. Move scroll bar on where there is video data and Play button. 5. Video data that is recorded on local PC will be play-backed. 9-8-5-2.
  • Page 91: Avi Backup During Playback

    2. Select site to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and slide window. 4. Move scroll bar on where there is video data and Play button. 5. Video data that is recorded on a remote DVR is play-backed. 9-8-6.
  • Page 92 1. Double-click the target channel to backup. 2. Select the beginning time by using the search calendar and slide bar. 3. Click MARK IN button, when the scale of the timeline is located on the target time as the beginning time of backup. 4.
  • Page 93: Network - By An Web-Browser Viewer

    Media Player™ or other media player that is compatible with AVI format video. Notice When it does a backup with NSF format, user can do a playback using the DVR player. The DVR player is installed with the S/W in user’s PC. 10.
  • Page 94 3. Click this bar. Then the dialog box is displayed. 4. Click “Install” to download ActiveX control. 5. Web Browser Viewer is displayed as bellow. 6. Click CONNECT button on the Left upper corner of web-viewer. Then “Connect” dialog is displayed. Enter IP address (or Domain name address that you pre-registered on www.bestddns.com, Port number and Password and click “Connect”...
  • Page 95  Server address: Input IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS or Domain name address that you pre-registered on www.bestddns.com.  Port: Input Port number (The number is set on SETUP>NETWORK>PORT.)  ID: Input ID of DVR.  Password: Input network password of DVR. (The number is set on SETUP>SYSTEM>NETWORK PASSWORD.) 7.
  • Page 96: Appendix: How To Connect Network

    APPENDIX: How to connect network A. How to set IP address of the DVR and open TCP port of the router? The port forwarding is dependent on the brand and model of the router. The port forwarding is required to allow access to the DVR beyond a router.
  • Page 97 Open your web browser. Enter the router IP address in the address bar (The router IP address are different with the brand and model.), click GO. 4. Enter the user name and password (admin is default) and press the OK button. 5.
  • Page 98: How To Access Dvr From Remote Pc

    You can learn how to port forward many kinds of Routers from the bellow site. http://www.portforward.com/english/routers/port_forwarding/routerindex.htm B. How to access DVR from Remote PC? LAN Connection – Using a switching hub Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-T/100BASE-TX CAT 5 LAN cable) 1.
  • Page 99 1. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP and DDNS SERVER as ON. And select one type among bestddns.com, okddns.com and ddnscenter.com after setting to DDNS1. 2. Go to Setup menu of Router and open TCP port 5445 and 80 using Port Forwarding. (Refer to A. How to set IP address of the DVR and open TCP port of the router?) 3.
  • Page 100  Model: Select one type surely among SDVR series, H DVR series DVR / N series DVR, HD DVR / IP Camera.  Site Name: Input the name of the DVR.  Site Address: Input the Domain Name that is registered on http://www.bestddns.com. (EX.
  • Page 101: How To Access Dvr With Iphone

    C. How to access DVR with iPhone? 1. Connect to App Store in iPhone and search “iUMS” to the search menu. Then, download the iUMS application. 2. Register your DVR and input the IP address or domain name, ID and password. Then, press Live or Playback mode.
  • Page 102: How To Access Dvr With Android

    D. How to access DVR with Android? 1. Connect to Market in Android and search “iUMS” to the search menu. Then, download the iUMS application. 2. Register your DVR and input the IP address or domain name, ID and password. Then, press the specific channel.

This manual is also suitable for:

X-plus series sp-drh08X-plus seriessp-drh16

Table of Contents