Sony AWS-750 Operating Instructions Manual page 59

Item Setting values
Left Top
[Full] –100 +100
[4:3] –75 +100
Tip
If you move the adjustment handles after enabling
[Full] or [4:3] (highlighted in blue), the button will
turn off (no longer highlighted), indicating deviation
from the [Reset] settings.
Adjustment handles: Drag each handle to specify the
areas of the image to be cropped.
Configuring the [Border] settings
Specify whether to add a border to the edges of the
overlay video.
[Border]: Selects whether to add a border around the
edges of the cropped image.
• [On]: Add a border.
• [Off]: A border is not added.
Drag the sliders for the following items to adjust them.
[Width]: Specify the width of the border.
[Luminance]: Specify the luminance of the border.
[Saturation]: Specify the saturation of the border.
[Hue]: Specify the hue of the border.
To restore the original value
Tapping [Reset] restores the original value.
Bottom Right
–100 +100
–100 +75
Configuring the [Transformation] settings
Adjust the size and position of the overlay video.
Adjustment handles
[Off] / [On]: Selects whether to use the [Transformation]
function.
• [On]: Enable the function.
• [Off]: Disable the function.
[Size]: Drag the slider to adjust the size of the inserted
image.
[Angle]: If you want to rotate the inserted image, select
the rotation direction, and drag the slider to specify the
angle of rotation.
• [Rot H]: Rotate the image horizontally
• [Rot V]: Rotate the image vertically.
[Position]: Drag the adjustment handle to adjust the
position of the inserted image.
To restore the original value
Tapping [Reset] restores the original value.
Compositing Videos Using Picture-in-Picture (PinP)
59