Related Manuals for Samsung SRP - 770
Summary of Contents for Samsung SRP - 770
- Page 1 SRP - 770 Thermal Label Printer Operator’s Manual JE68-00131B http://www.samsungminiprinters.com...
-
Page 2: Safety Precautions
Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. WARNING WARNING Violating following instructions can cause slight wound or damage the appliance. Violating following instructions can cause serious injury or death. Keep the desiccant out of children’s Install the printer on the stable surface. -
Page 3: Samsung Label Printer
1. Unpacking 2. Samsung Label Printer Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Feed Button Status Indicator Cover Peel-off Power Switch Cover Open/Close Printer Head Paper Holder Printer (SRP-770) Operator’s Manual... -
Page 4: Connecting The Power Supply
3. Connecting the Power Supply 4. Connecting the Interface Cable CAUTIONS: When connecting or disconnecting the power supply from the printer, make sure that the power supply is not plugged into an electrical outlet. And the power supply’s rated voltage and your outlet’s voltage do not match, contact your dealer for assistance. -
Page 5: Installing Or Replacing The Paper Roll
5. Installing or Replacing the Paper Roll 6. Setting The Dip Switches 6-1. Setting the Dip Switches The Dip Switches are located on the bottom of the printer. The Dip Switches are used to ① Open Cover ② Open Guides set the Printer to perform various functions. -
Page 6: The Self Test
7. The Self Test 8. The Peel-off (and Autosense Gapsensor Adjustment) Printers can Peel-off a single label. The self-test checks whether the printer has any problems. And perform this procedure You must remove the label before the printer prints the next label. when loading a new roll.(You cannot perform this procedure if using the printer’s label peel-off option) If the printer does not function properly, contact your dealer. -
Page 7: Using Fan Fold Paper
9. Using Fan Fold Paper 【 Specification 】 Insert paper through both the rear slot and guides. Adjust holders and guides to the width of the paper. Printing method Thermal line printing Dot density 203 dpi (8 dot/mm) Printing width 25.4 ~ 101.6 mm Paper width 38.1 ~ 104 mm...