MIDDLE GEAR
Shims are supplied in the following thickness.
Middle drive pinion gear shim
Thickness (mm)
*****************************************************
INSTALLING THE MIDDLE DRIVEN SHAFT
1.Install:
Bearing retainer 1
G
NOTE:
Attach the ring nut wrench 2.
Ring nut wrench:
P/N. YM-38404, 90890-01430
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
retainer turn it counterclockwise.
2.Install:
Bearing retainer 1
G
*****************************************************
Installation steps:
Attach the folded rag 2.
G
G
Secure the bearing housing edge in the vise.
Attach the bearing retainer wrench 3.
G
Bearing retainer wrench:
P/N. YM-04128, 90890-04128
4 - 85
ENG
0.10
0.40
0.15
0.50
0.20
0.60
0.30
LT
80 Nm (8.0 m • kg, 58 ft • lb)
LT