Cleaning The Spark Arrester - Yamaha YFM45FAR Service Manual

CHECKING THE V-BELT/

CLEANING THE SPARK ARRESTER

3 - 34
4.Replace:
V-belt
G
*****************************************************
Replacing steps:
Install the bolts 1 (90101-06016) into the
G
secondary fixed sheave hold.
NOTE:
Tightening the bolts 1 will push the secondary
sliding sheave away, causing the gap between
the secondary fixed and sliding sheaves to
widen.
Remove the V-belt 1 from the primary
G
sheave and secondary sheave.
G
Install the V-belt.
NOTE:
Install the V-belt so that its arrow faces the
direction shown in the illustration.
G
Remove the bolts.
*****************************************************
CLEANING THE SPARK ARRESTER
1.Clean:
Spark arrester
G
*****************************************************
Cleaning steps:
WARNING
Select a well-ventilated area free of
G
combustible materials.
Always let the exhaust system cool
G
before performing this operation.
Do not start the engine when removing
G
the tailpipe from the muffler.
CHK
ADJ