Evf Back Light), Po-006 (Panel Open/Close), Fp-181 (Panel Reverse) Printed Wiring Boards - Sony DCR-TRV30E Service Manual

DCR-TRV30/TRV30E
LB-072 (EVF, BACK LIGHT), PO-006 (PANEL OPEN/CLOSE), FP-181 (PANEL REVERSE) PRINTED WIRING BOARDS
— Ref. No. LB-072 Board; 30,000 Series —
For printed wiring board
• Refer to page 4-93 for parts location.
• This board consists of multiple layers. However, only
the sides (layers) A and B are shown.
• Chip parts
Transistor
C
B E
There are a few cases that the part printed on
this diagram isn't mounted in this model.
EVF, BACK LIGHT PANEL OPEN/CLOSE
/ /
LB-072 PO-006
• : Uses unleaded solder.
LB-072
(EVF, BACKLIGHT)
JK-207
(AV IN/OUT, STEADY SHOT)
FLASH UNIT
PANEL REVERSE
FP-181
•
• Refer to page 4-64 for schematic diagram.
PANEL
For printed wiring board
• This board consists of multiple layers. However, only
the sides (layers) A and B are shown.
There are a few cases that the part printed on
this diagram isn't mounted in this model.
• Refer to page 4-64 for schematic diagram.
FP-181 FLEXIBLE
• : Uses unleaded solder.
S97
(PANEL REVERSE)
1-677-563-
: Uses unleaded solder.
CD-320
(CCD IMAGER)
CK-102
(CONTROL SWITCH, LCD DRIVE)
SE-121
(MF SENSOR)
PO-006
(PANEL OPEN/CLOSE)
41
CONTROL SWITCH BLOCK
(PS-1800)
FP-181
FP-329
FP-325
4-68
1
6
CONTROL SWITCH BLOCK
(KP-1800)