D-Link DES-1228/ME Reference Manual page 250

delete iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the default IP route 10.53.13.254:
DES-1228/ME:5#delete iproute default
Command: delete iproute default
Success.
DES-1228/ME:5#
show iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the contents of the IP routing table:
DES-1228/ME:5#show iproute
Command: show iproute
Routing Table
IP Address/Netmask
---------------
0.0.0.0
10.0.0.0/8
Total Entries: 2
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to delete a default IP route entry from the Switch's IP routing
table.
delete iproute [default]
This command is used to delete an existing default entry from the
Switch's IP routing table.
None.
Only Administrator level, Operator level or Power User level users can
issue this command.
Used to display the Switch's current IP routing table.
show iproute {<network_address> | static}
This command is used to display the Switch's current IP routing
table.
<network_address> − The network IP address.
static – Select a static IP route.
None.
Gateway
----------
10.1.1.254
10.48.74.122
Interface Hops
----------- ----
System 1
System 1
246
Protocol
-----------
Default
Local