Mini-Pci Lan/Modem; Keyboard - NEC Versa Sxi Series Service And Reference Manual

Mini-PCI LAN/Modem

Remove the mini-PCI LAN/ Modem card as follows.
Remove the memory module bay screw and cover.
1.
Disconnect the mini-PCI LAN/modem cable from the main board.
2.
Remove the mini-PCI LAN/modem card as follows:
3.
Press the locking tabs away from the sides of the card and hold while gently lifting on
!
the edge of the card.
When the edge of the card pops up and is at approximately a 60 degree angle, pull the
!
card from the socket.
A – Locking Tabs
B – Connector CN24 on Main Board

Keyboard

Follow these steps to remove the keyboard.
Turn the system over and open the LCD panel.
1.
Locate the two keyboard retainers, press and slide each one towards the outside edge of the
2.
system. Remove the retainers.
Removing the mini-PCI LAN/modem
Removing the keyboard retainers
C – Connector CN25 on Main Board
D – System Board Visible Through Bay
Disassembly and Reassembly 3-7