Removing The Wireless Mini Pci Card; Removing The Touchpad - NEC Versa S800 Disassembly Manual

Removing the Wireless Mini PCI Card

To remove the wireless mini PCI card, first remove the battery (see
then perform the following steps:
1. Unscrew the three screws shown in Fig. 2: to open the cover assy.
2. Flap open the plastic sheet covering the mini PCI card.
3. Carefully disconnect the two antenna wires connected to the wireless mini PCI card.
4. Pull apart the retaining clips in order to release the wireless mini PCI card as shown in
Fig. 4:
5. Take the wireless mini PCI card out of the system and put it aside.

Removing the Touchpad

Fig. 3: Removing the wireless mini PCI antenna wires
Fig. 4: Removing the wireless mini PCI card
NEC Versa S800 Disassembly Manual
Removing the Battery),
Page 6