Power Distribution Units (2U); Figure 1.21 Power Distribution Unit (Ac200-240V, 2U, 12 Outlets); Figure 1.22 Power Distribution Unit (Ac200-240V, 2U, 16 Outlets) - Fujitsu ETERNUS DX60 S3 Operating Instructions Manual

Chapter 1 Component Name/LED Name
1.3 Power Distribution Units (for Regions Other than EMEA&I)
1.3.2

Power Distribution Units (2U)

2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
■
Power Distribution Unit (AC200-240V, 2U, 12 Outlets)
There are 12 outlets.

Figure 1.21 Power Distribution Unit (AC200-240V, 2U, 12 Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
■
Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
There are 16 outlets.

Figure 1.22 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
1
2
1
2
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
29
P3AM-9012-01ENZ0