Ec Declaration Of Conformity - Black & Decker charger Manual

Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of
our after-sales service and contacts are available on the
Internet at: www.2helpU.com.
Black & Decker batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Do not short-circuit the battery terminals.
Run the battery down completely, then remove it from
the appliance.
NiCd, NiMh and Lithium Ion batteries are recyclable.
They must not be disposed of with household waste.
Place the battery in suitable packaging to ensure that
the terminals cannot be short-circuited. Take the battery
to any authorised repair agent or a local recycling
station.
Technical data
Input voltage
Output voltage
Weight
Battery
Voltage
Capacity
Weight
Charger
Voltage
Approx. charging time
Weight

EC declaration of conformity

BD18RC
Black & Decker declares that these products conform to:
Standards & Legislation.
EN60065, 2006/95/EC
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker
Director of Consumer Engineering
Spennymoor, County Durham, DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement
is in addition to and in no way prejudices your statutory
rights. The guarantee is valid within the territories of the
Member States of the European Union and the European
Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black & Decker
guarantees to replace defective parts, repair products
subjected to fair wear and tear or replace such products to
make sure of the minimum inconvenience to the customer
unless:
The product has been used for trade, professional or
hire purposes.
BD18RC
Vdc 18
Vac 11.4
kg 1.9
NiCD NiMh
Vdc 18 18
Ah 1.5/1.7 1.5
kg 0.8 0.8
Vac 230
h 6.9
kg 0.5
Kevin Hewitt
United Kingdom
19-08-2008
7