Tilt And Swivel Base - Philips 190B7 Service Manual

19" LCD Color Monitor
5.7 Resins
RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.8 If paint is used
RoHS required
WEEE require
5.9 Plastic mold tooling
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines, gate
marks, ejector marks, etc.).
Painting to cover up cosmetic defects due to molding is strongly discouraged.
5.10 Plastics flammability
All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is OK).
All major plastic parts (bezel, back cover, base) need to be molded from same resin.
5.11 Texture/Glossing of housing
The texture area and texture no should follow Philips make-up sheet.
The exterior surfaces shall have a uniform texture.
Philips must approve the mold texturing.
Detail document for texture refer to UAN-D249.
< = 20 gloss units

5.12 Tilt and swivel base

-5 ° max. forward, +25 ° min. backward.
Tilt angle :
+/- 60 °
Swivel angle:
High Adjustment: 60 mm
Portrait Display : NA
5.13 Label
Regulatory label / Carton label should follow Philips requirement.
Detail document refer to Philips Engineering Reference Book.
5.14 Product dimension / Weight
Unit dimension (incl. pedestal): 422 (W) * 405 (H) * 198.8 (D) mm
Packed unit dimension (carton): 503 (W) * 507 (H) * 198.8 (D) mm ( for other regions )
Net weight
Gross weight
5.15 Transportation
Transportation standards refer to TYE-M0002.
5.15.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from the
supplier to the destination specified in the purchase order.
evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
5.15.2 Transportation Test
The overall test refer to TYE-M0002.
Vibration, drop test should be performed at ambient temperature (20°C to 23oC) and relative humidity (40% to
65% ).
A. Transportation test specification for all regions except China/India
Package test
Random Vibration test
Drop test
Cold Drop test (for design reference)
Un-package test
Half sine shock test (non operation)
B. Transportation test specification for China/India
Package test
Random Vibration test
: ? (W) * ? (H) * ? (D) mm( for China/India )
: 6.14 Kg (Including I/F cable 240 g)
7.55 Kg ( for other regions ) ?Kg ( for China/India)
:
All packaging materials are subject to test and
117
190B7