Turning The Tx Lock On/Off; Memory Security (Mfc-665Cw Only) - Brother MFC-440CN User Manual

Chapter 4

Turning the TX Lock on/off

Turning TX Lock on
a
Press Menu.
b
Press a or b to choose Fax.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
Press a or b to choose TX Lock.
Press OK.
e
Press a or b to choose Set TX Lock.
Press OK.
f
Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off
a
Press Menu.
b
Enter the registered 4-digit password.
Press OK.
TX lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
30
Memory Security
4
(MFC-665CW only)
4
Memory Security lets you prevent
unauthorized access to the machine. You will
not be able to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled
Delayed Faxes will be sent even if you turn on
Memory Security, so they will not be lost.
While Memory Security is On, the following
operations are available:
Receiving faxes into memory (limited by
memory capacity)
Fax Forwarding (If Fax Forwarding was
already On)
Remote retrieval (If Fax Storage was
already On)
While Memory Security is on, the following
operations are NOT available:
Printing received faxes
4
Sending faxes
Copying
PC printing
Scanning
PhotoCapture
PC Fax Receive
Note
• To print the faxes in memory, turn off
Memory Security.
• You must turn off PC Fax Receive before
you can turn on Memory Security. (See
Turning off Advanced Fax
Operations on page 81.)
4