Chapter 4 - Input/Output Settings; Power Up Beeper; Beep On Bel Character; Trigger Click - Honeywell Voyager 1450g Series User Manual

4
Input/Output Settings

Power Up Beeper

The scanner can be programmed to beep when it's powered up. If you are using a cordless system, the base can also be pro-
grammed to beep when it is powered up. Scan the Off bar code(s) if you don't want a power up beep. Default = Power Up
Beeper On - Scanner.
Power Up Beeper Off -
Scanner
Power Up Beeper Off -
Cordless Base

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off

Trigger Click

To hear an audible click every time the scanner trigger is pressed, scan the Trigger Click On bar code below. Scan the Trigger
Click Off code if you don't wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger
Click Off.
*Trigger Click Off
* Power Up Beeper On -
Scanner
* Power Up Beeper On -
Cordless Base
Beep on BEL On
4 - 1