Monitor Section. Cue Buttons. Assigning A Monitor Output - Yamaha M7CL Quick Start Manual

The virtual effects rack. remote ha connection. editor connection guide. using scenes, patching monitor out, accessing outport delays

Hide thumbs Also See for M7CL:

Table of Contents

MONITOR section. CUE buttons. Assigning a monitor output.

Cueing a channel will send its audio signal to the CUE bus and meter the channel in the Function Access Area.

The audio will be sent to the headphone output under the front panel. Press the [MONITOR] headphone symbol

to access options for the monitor setup.

Using the SOURCE SELECT buttons

in the MONITOR section can switch

off the default STEREO L/R feed to the

monitor bus or replace it with one of

the other outputs or a ST IN.

The PHONES LEVEL LINK makes the

headphone level control come after

the MONITOR LEVEL pot on the

surface. This link can be broken,

which is especially useful for monitor

mixing.

Note; [CUE] > [SEL] link is in SETUP>USER SETUP .

By default, the MONITOR section is fed by

STEREO L/R and these signals are sent to

the headphone output. (Found under the

front panel.) Cueing a signal interrupts this

and replaces the cued signal.

Press here for

cue clear.

As well as the headphones, the MONITOR

section can output via an OMNI socket on

the rear. This patching is also accessed

from the MONITOR pop-up.

14/20

M7CL Quick Start Guide Part 2

Table of Contents