Epson Runsense SF-710 User Manual page 4

SF-710/510/310 User Manual
Goal function (distance race)
Measure settings
Introduction
Allows you to set a distance as your goal and measure the distance taken until that goal
is reached.
You can exercise while checking the distance. You can also calculate the estimated total
time to complete the set distance.
"Measure until the Time or Distance Set in Advance Is Reached (Goal Function)" on
U
page 50
You can use the recall screen to check recorded measurement data.
"Checking Measurement Data" on page 63
U
Allows you to change the measurement settings.
❏ Automatically records laps when a time or distance set in advance has been
reached (AT Lap function)
"Recording Laps Automatically (AT Lap Function)" on page 54
U
❏ Automatically stops measuring when you stop running, and resumes when you
continue running (AT Pause function)
"Automatically Start/Stop Measuring (AT Pause Function)" on page 56
U
❏ Sets and measures the target time for one kilometre/mile (Target Pace function)
"Setting a Pace and Measuring (Target Pace Function)" on page 57
U
❏ Set a waypoint to display the direction and distance to the waypoint, and the
difference in elevation (Waypoint function) (SF-710 only)
"Setting and Measuring Waypoints (Waypoint Function)" on page 59
U
❏ Monitors heart rate with the heart rate monitor (Heart rate function)
"Measuring Heart Rate" on page 72
U
❏ You can change the items and layout of the measurement screen display (Screen
settings function)
"Screen" on page 115
U
❏ Tap to display a set function (Tap function)
"Tap" on page 20
U
4