Deleting The Fault Codes; Delete Function Test - Yamaha 2012 TMAX XP500A Service Manual

Table of Contents

Advertisement

EAS59C2808
[C-1] DELETING THE FAULT CODES
ECA59C2802
Since the fault codes remain in the memory
of the ABS ECU until they are deleted,
always delete the fault codes after the ser-
vice has been completed.
1. Connect the test coupler adapter "1" to the
ABS test coupler "2".
2. Set the main switch to "ON".
Fault codes will be displayed in the multi-
function display.
3. Set the engine stop switch "1" to "
ECA59C2803
If the start switch is pushed without setting
the engine stop switch to "
motor gears or other parts may be dam-
aged.
4. Without operating the brake lever, push the
start switch "2" at least 10 times in 4 sec-
onds to delete the fault codes.
5. The multi-function display switches to the
odometer display and the ABS warning
light flashes in 0.5 second-intervals while
the fault codes are being deleted.
6. Set the main switch to "OFF".
ABS (ANTI-LOCK BRAKE SYSTEM)
".
", the starter
8-115
7. Set the main switch to "ON" again.
TIP
If fault codes are still displayed in the multi-
function display, the malfunctions have not
been repaired. Diagnose the malfunctions
using the fault codes.
8. Set the main switch to "OFF".
9. Disconnect the test coupler adapter from
the ABS test coupler, and then install the
protective cap onto the ABS test coupler.
Deleting the fault codes is now finished.
TIP
Do not forget to install the protective cap onto
the ABS test coupler.
EAS59C2809
[C-2] DELETE FUNCTION TEST
1. Place the vehicle on the centerstand.
2. Set the main switch to "OFF".
3. Connect the test coupler adapter to the
ABS test coupler.
4. Set the main switch to "ON".
5. Check:
• ABS ECU voltage
Lower than 12.8 V → Charge or replace
the battery.
Battery voltage
Higher than 12.8 V
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Connect the digital circuit tester (DC 20 V)
to the ABS ECU coupler.
Digital circuit tester
90890-03189
Model 88 Multimeter with
tachometer
YU-A1927
• Positive tester probe →
Brown/white "1"
• Negative tester probe →
Black "2"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp530a

Table of Contents