Makita 2414NB Instruction Manual page 10

Operation
Hold the handle firmly. Switch on the tool and wait until the wheel attains full speed before
lowering gently into the cut. When the wheel contacts the workpiece, gradually bear down
on the handle to perform the cut. When the cut is completed, switch off the tool and WAIT
UNTIL THE W H E E L HAS COME TO A COMPLETE STOP before returning the handle to
the fully elevated position.
CAUTION:
Proper handle pressure during cutting and maximum cutting efficiency can be determined
by the amount of sparks that is produced while cutting. Your pressure on the handle
should be adjusted to produce the maximum amount of sparks.
Do
not force the cut by
applying excessive pressure on the handle. Reduced cutting efficiency, premature wheel
wear, as well as, possible damage to the tool, cut-off wheel or workpiece may result.
Cutting capacity
Max. cutting capacity varies depending upon the cutting angle and workpiece shape.
115mm 106 mm 115mmx 103"
45" (4-1/2") (4-3/16") (4-1R" x 4-1/16")
Workpiece A A x B
shape
Cutting
angle
115mmx 130mm
(4-1/2" x 51B")
100 mm
(3-1 5/16")
90"
119mm 102 mm
x
194 mm
70 mm x
233 mm
I
l(i?Fy
I
(4-11/16")
1
(2-3/4"
x 9-1B")
Carrying the tool
Fold down the tool head to the position
where you can attach the chain to the hook
on the handle.
10
,