Page 2
Congratulations! On the purchase of your Black & Decker cordless drill. To ensure the best results from your cordless drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
Contents Page 4 Safety instructions Additional drill and charger safety instructions Page 5 Electrical safety Mains plug replacement Page 6 Fuse replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product The after sales service policy Accessories Extra batteries...
Cordless drills user manual • Remove adjusting keys and wrenches. Form the habit SAFETY INSTRUCTIONS of checking to see that keys and adjusting wrenches Warning! When using electric tools, the following are removed from tool before switching it on. basic safety precautions should always be taken to •...
ENGLISH ELECTRICAL SAFETY • Never attempt to connect two chargers together. Be sure the supply is the same as the voltage given on the • Always disconnect the supply before making or rating plate. Your charger is fitted with a two-core cable breaking connections to the battery.
ENGLISH • Repairs have not been attempted by anyone other For replacement or detachable fuse covers, contact than our authorised repair distributors. a Black & Decker authorised repair agent. This guarantee is offered as an extra benefit and is Warning! Never connect live or neutral wires to the additional to the customers statutory rights.
ENGLISH TECHNICAL DATA • The variable speed trigger switch is used to operate The level of sound pressure of the tool is in accordance your drill in all modes of operation. It also controls with EEC legislation. It is recommended that you take the speed of your drill.
ENGLISH The torque adjustment collar has 5 positions and charged in 3 hours. If your power pack is run-down completely it may take up to 8 hours to become fully provides adjustment of the torque necessary to seat charged. screws of a given size in a particular material. Your power pack was sent from the factory in an Proceed as follows: uncharged condition;...
ENGLISH CHANGING THE CHUCK do not push hard enough Make sure the forward/reverse switch is set to the to stall the motor. centre (lock-off) position. After use, remove the drill bit, open the chuck To remove the chuck, jaws fully and tap the open the jaws, hold it side of the chuck to firmly in one hand and...
Page 10
Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway Fax: 03 9726 7150 North Croydon, Victoria 3136 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road Fax: 09 579 8200 Penrose, Auckland South Africa Black &...