Wiring Connection - Kenwood KDC-X599 Instruction Manual

Wiring connection

Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of
Battery the car
JS_KWD_KDC_X599_KW_EN_03.indd 27
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 10)
White
White/Black
Brown
Gray (Mute control wire)
Gray/Black
Only for
Green
Light blue/yellow
Green/Black
(Steering remote
control wire)
Purple
Purple/Black
Blue/White
(Power control wire/
Antenna control wire)
Only for
Red
Light blue/yellow
(Ignition wire)
(Marine remote control
wire)
Yellow
Blue/White
(Battery wire)
(Power control wire)
Blue
(Antenna control wire)
MIC (Microphone input terminal) ( 13)
If no connections are made, do not let the wire come out from the tab.
To connect the Kenwood navigation system,
refer your navigations manual
/ :
To the steering wheel remote control
adapter
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
:
(Not used)
To the power control terminal when
using the optional power amplifier.
(Not used)
When connecting to an external
amplifier, connect its ground
wire to the car's chassis to avoid
damaging the unit.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
27
ENGLISH
10/8/2014 5:01:13 PM