Specifications - Kenwood KDC-X599 Instruction Manual

TROUBLESHOOTING
Symptom
No Bluetooth device is
detected.
Bluetooth pairing cannot
be made.
Echo or noise is heard during
a phone conversation.
Phone sound quality is
poor.
Voice calling method is not
successful.
Sound is being interrupted
or skipped during playback
of a Bluetooth audio player.
The connected Bluetooth
audio player cannot be
controlled.
"DEVICE FULL"
"N/A VOICE TAG"
"NOT SUPPORT"
"NO ENTRY" / "NO PAIR"
"ERROR"
"NO INFO"
"HF ERROR XX" /
"BT ERROR"
24
JS_KWD_KDC_X599_KW_EN_02.indd 24
Remedy
• Search from the Bluetooth device again.
• Reset the unit. ( 3)
• Make sure you have entered the same PIN code to both the unit and
Bluetooth device.
• Delete pairing information from both the unit and the Bluetooth
device, then perform pairing again. ( 13)
• Adjust the microphone unit's position. ( 13)
• Check the [ECHO CANCEL] setting. ( 14)
• Reduce the distance between the unit and the Bluetooth device.
• Move the car to a place where you can get a better signal reception.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you speak the name.
• Make sure the same voice as the registered voice tag is used.
• Reduce the distance between the unit and the Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the unit.
• Check whether the connected Bluetooth audio player supports Audio/
Video Remote Control Profile (AVRCP). (Refer to the instructions of your
audio player.)
• Disconnect and connect the Bluetooth player again.
The number of registered devices has reached its limit. Retry after
deleting an unnecessary device. ( 17, DEVICE DELETE)
Make sure the same voice as the registered voice tag is used.
The connected phone does not support Voice Recognition feature.
There is no registered device connected/found via Bluetooth.
Try the operation again. If "ERROR" appears again, check if the device
supports the function you have tried.
Bluetooth device cannot get the contact information.
Reset the unit and try the operation again. If this does not solve the
problem, consult your nearest service center.

SPECIFICATIONS

FM Frequency Range
Usable Sensitivity
(S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3 dB)
Signal-to-Noise Ratio
(MONO)
Stereo Separation
(1 kHz)
AM Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
Wow & Flutter
Frequency Response (±1 dB)
Total Harmonic Distortion
(1 kHz)
Signal-to-Noise Ratio
(1 kHz)
Dynamic Range
Channel Separation
87.9 MHz — 107.9 MHz
(200 kHz space)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
30 Hz — 15 kHz
64 dB
40 dB
530 kHz — 1 700 kHz
(10 kHz space)
29 dBμ (28.2 μV)
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
: 110 dB
Other models: 105 dB
90 dB
85 dB
17/7/2014 9:54:10 AM