Connecting To A Wireless Lan - Canon LBP6030w Manual

Connecting to a Wireless LAN

Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is equipped with Wi-Fi
Protected Setup (WPS), you can configure your network with a simple button push. If your networking devices do not support automatic
configuration, or if you want to specify authentication and encryption settings in detail, you need to set up the connection manually. To
make wireless settings for this machine, use the MF/LBP Network Setup Tool from your computer. Make sure that your computer is
correctly connected to the network.
Log on as an administrator
To perform the following procedure, log on to your computer with an administrator account.
Risk of information leak
Use wireless LAN connection at your own discretion and at your own risk. If the machine is connected to an unsecured network,
your personal information might be leaked to a third party because radio waves used in wireless communication can go anywhere
nearby, even beyond walls.
Wireless LAN security standards
This machine supports the following wireless LAN security standards. For the wireless security compatibility of your wireless
router, see the instruction manual or contact the manufacturer.
128 (104)/64 (40) bit WEP
WPA-PSK (TKIP/AES-CCMP)
WPA2-PSK (TKIP/AES-CCMP)
Required devices for wireless LAN connection
The machine does not come with a wireless router. Have the router ready as necessary.
The wireless router must conform to the IEEE 802.11b/g/n standards and be able to communicate in the 2.4 GHz band. For
more information, see the instruction manual for your wireless router or contact the manufacturer.
1
Insert the User Software CD-ROM/DVD-ROM into the drive on the computer.
2
Click [Start Software Programs].
Downloaded from ManualsPrinter.com Manuals
0HWJ-021