Printing Results Are Not Satisfactory - Canon LBP6030w Manual

Printing Results Are Not Satisfactory

Grime inside the machine may affect printing results. First try cleaning the machine.
Smudge Marks Appear on the Bottom Edge of Printouts
Did you print data without margins, all the way to the edge of the page?
This symptom occurs if a margin is set to none in the printer driver. The range that can be printed on this machine
is the range inside a 5 mm margin around the edge of the paper or a 10 mm margin around the edge of envelopes.
Make sure to have margins around the document to print.
[Finishing] tab
Streaks Appear on Printouts
Are you using appropriate paper?
Check the usable paper types, and replace with appropriate paper.
Paper
In the printer driver, set [Output Adjustment Mode] to [On].
[Quality] tab
Printing speed may be slower if you set the mode to [On].
In the printer driver, change the setting of [Special Print Adjustment A]. The improvement effect is weakest for
[Mode 1] and strongest for [Mode 4]. Try the adjustment starting with [Mode 1].
[Finishing] tab
When you select a stronger improvement effect, the overall print density becomes lighter. Also, edges may
become less sharp and details may be rougher.
In the Printer Status Window, enable [Reduce Toner Spots Around Text].
Displaying the Printer Status Window
[Options]
check box
When you select this check box, print quality may be lower for some types of paper (especially thin paper) and
some printing environments (especially environments with high humidity). In that case, clear the check box.
Turn over the paper (front to back) so that the print side is changed, and then reload the paper.
Rarely, the symptoms may worsen depending on the type of paper you are using. In that case, get the print side
back to original.
Toner may adhere when you replace the toner cartridge or when you leave the machine without printing for a
Downloaded from ManualsPrinter.com Manuals
[Advanced Settings]
[Advanced Settings] [Output Adjustment Mode]
[Advanced Settings]
[Device Settings] [Assisting Print Settings]
Cleaning the Machine
[Expand Print Region and Print]
[Special Print Adjustment A]
Select the [Reduce Toner Spots Around Text]
[Off]
[On]
Select mode
0HWJ-03L