Table of Contents
Advertisement
1-1. SELF DIAGNOSIS FUNCTION
What flashing of the indicators on
the front of the monitor means
The u (power) (green), STANDBY (orange) and/or
LAMP (red) indicators indicate the conditions of the
monitor and warnings by lighting or flashing, as
follows.
The u indicator lights.
The power of the monitor is on.
/
The STANDBY indicator lights.
The monitor is in standby mode. The
/
monitor is turned on by pressing
POWER on the remote control.
SECTION 1
SELF DIAGNOSIS FUNCTION
The u and STANDBY indicators light.
The u indicator flashes.
The LAMP and STANDBY indicators flash.
The LAMP indicator flashes.
The LAMP, STANDBY and u indicators flash.
If the monitor is not recovered after correcting the
problems, contact with qualified Sony personnel.
– 5 –
The Auto Shut Off function works. The
/
monitor has been turned off when the
time you specify has passed after the
input of the computer is cut off.
The lamp for the light source is ready to
/
turn on. You can obtain picture and
sound after a while.
The air filter or the lamp cover is not
/
attached securely. When you correct, the
STANDBY lamp lights up and the
monitor enters the standby mode. (pages
17 and 18)
The lamp for the light source burns out.
/
Replace it with new one. (page 18)
The temperature inside the monitor has
/
risen abnormally, or the fans have
stopped.
Check that the air filter is not clogged
and the ventilation holes are not
blocked. After a while turn on the
monitor. (page 17)
KL-W7000A/W9000A
RM-Y980
Advertisement
Table of Contents
