Cleaning The Air Filter - Sony KL-W9000A Service Manual

Lcd projection data monitor
Hide thumbs Also See for KL-W9000A:
Table of Contents

Advertisement

Turning the power
off automatically
(AUTO SHUT OFF)
You can set the monitor to turn off when the time you
specify has passed after the input of the sync signal
from the computer shut off.
CENTER/
MENU
SIZE
ENTER
VOL
1
Press MENU.
MENU
2
Press V or v to select OPTION, and press
ENTER.
ENTER
3
Press V or v to select AUTO SHUT OFF, and
press ENTER.
ENTER
OPTION
N
AUTO SHUT OFF:OFF
LANGUAGE: ENGLISH
DOT PHASE: 16
24
-US
Operations
4
Press B or b to select 60 (minutes), 90
(minutes) or 120 (minutes), and press
ENTER.
ENTER
5
Press MENU to return to the original screen.
After the time you specify in step 4 has passed after
cancellation of the input of the sync signal, the
power turns off and the STANDBY and u
indicators will light up.
If you press POWER on the remote control or a
signal is input from the computer again, the power
will turn on.
To cancel the AUTO SHUT OFF function
Select OFF in step 4 above.
Note
• You cannot use this function for the input from VIDEO 1 IN,
VIDEO 2 IN, VIDEO 3 IN and DVD IN.
Additional Information
Cleaning the air
filter
The air filter should be cleaned once a month. When it
becomes difficult to remove the dust, replace the filter
with a new one. To clean the filter, follow the steps
below.
1
Turn off the power switch on the monitor
and unplug the power cord.
2
Remove the front panel from the monitor.
Hold the monitor tightly.
Grasping the left end of the front panel
with your fingers, pull the panel towards
you. Be careful not to catch your fingernails.
3
Pull the air filter upwards to remove.
4
Remove the dust from the filter with a
vacuum cleaner.
Vacuum cleaner
5
Attach a new filter to the monitor.
Fit the six projections securely.
6
Mount the front panel.
Be careful not to injure the speakers.
Notes
• Clean the air filter periodically. Otherwise, the temperature
inside the monitor may rise abnormally.
• Do not use a torn filter. Fit the six projections on the filter to the
monitor securely. Dust inside the monitor may cause distorted
picture and also fire.
• Be sure to attach the air filter securely. Otherwise, the monitor
will not turn on.
• Contact your Sony dealer for a new filter.
25
-US
Additional Information
US

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kl-w7000a

Table of Contents