Hardware Installation - D-Link DHP‑P309AV User Manual

Section 2 - Installation
Power
Plug in the DHP-P308AV into an AC wall outlet or power strip.
Note: Power source is confirmed when the Power LED on the DHP-P308AV is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable
connector located on the DHP-P308AV and attach the other
end of the Ethernet cable to the network or PC. Network
Connectivity is confirmed when the Ethernet LED on the
DHP-P308AV are illuminated.
Power Saving Mode Enabled
When you click the Simple Connect button quickly twice,
the DHP-P308AV will go into power saving mode. To wake
the device up, just click the Simple Connect button again.
WARNING! D‑Link powerline devices cannot be configured while in
Power Saving Mode enabled.
D-Link DHP-P309AV User Manual

Hardware Installation

ROOM A
1
DHP-P308AV
Internet Router
ROOM A
3
DHP-P308AV
Internet Router
ROOM B
2
DHP-P308AV
NB
ROOM B
DHP-P308AV
NB
8