Refueling And Operation - Horizon Fitness H-racer User Manual

Hydrogen car

Hide thumbs Also See for H-racer:

Enlarged version

5. Refueling and operation

H-racer

To refuel the

with hydrogen you will need the

syringe with valve (part F), and the additional input valve (part D) with rubber tubing (part G).

H-racer

The

's power system only accepts hydrogen as its fuel. If other gases are present, the fuel

cell cannot operate and the car will not move. For optimal performance of the

has to be purged of all the gases within the car and station.

Step 1

Make sure the switches underneath the car's chassis and on the

side of the Hydrogen Station are at the "off" position. Connect

the refueling station's output valve to the car's input valve by

firmly pressing the syringe's connector valve into the car's input

valve, and

simultaneously

turning the output valve clockwise.

(see 1A & 1B).

Once the two valves are connected you can let go of the output

valve as both valves are now locked into position.

TIP: The refueling station's output valve is fragile. If you do not

continue to "press in" while you are turning the output valve

clockwise, you will risk breaking the output valve.

Hydrogen Station

, the gas purging

H-racer

the system

Step 2

Ensuring the refueling station's output valve remains connected to the car, open the small, grey

pressure valve on the side of the refueling station (see 2A & 2B).

Step 3

Connect the third flexible tubes (part G) to the nozzle located on the additional input valve (part D)

(see Step 2 of Assembly Instructions).

Step 4

Holding the pressure valve open, insert the open end of the rubber tube onto the little nozzle inside

the grey pressure valve (see 4A).

Table of Contents