Table of Contents
Advertisement
Administrator Setup
Preset1, Preset2, Preset3
,
1. Press the [
] buttons to select a preset
number to be set.
select
2. Press the [
] button to select [Form].
Select
3. Press the [
,
] buttons to change the
settings.
select
4. Press the [
] button to select [Main Sub].
Select
,
5. Press the [
] buttons to change the setting
and press the [
] button to confirm the
setting.
Select
Confirm
Pattern of the selected Main video and Sub video is
displayed at the lower right on the screen.
(continued)
Preset setting pattern
Form
1Ch
2Ch
4Ch-QUAD
4Ch-PANORAMA
5Ch-QUAD
5Ch-PANORAMA
Notes:
•
Some pattern cannot be selected depending on the
connected cameras.
(See "Camera Connection and Combination of Cameras"
on page 117.)
•
If Form is set to "-", no Preset can be selected.
Main Resolution/RecRate
Set the resolution and record rate of a main video.
Setting: CIF, D1 10, D1 STD, D1 HI
(For details, see "Record time in each record mode" on
page 5,)
Note:
If the Main Resolution/RecRate is set to "D1 10", the setting
of the Sub Resolution/RecRate is changed to "D1 10".
Sub Resolution/RecRate
Set the resolution and record rate of a sub video.
Setting: CIF, D1 10, D1 STD, D1 HI
(For details, see "Record time in each record mode" on
page 5,)
Note:
If the Sub Resolution/RecRate is set to "D1 10", the setting
of the Main Resolution/RecRate is changed to "D1 10".
Enabling the settings
When setting is changed on this screen, the [Set] button
appears at lower left on the screen.
To enable the settings on the screen, select [Set] and press
the [
] button.
If you press the [Return] button on the remote control panel
to terminate the screen, the setting will not be updated.
Note:
If the Preset setting is enabled, the selection with the
[CAMERA SELECT] button will be the main picture of
Preset1.
80
Main
Sub
–
1 / 2 / 3
1 / 2
2 / 3
–
6
1/2/3
4
5
–
1 / 2 / 3
4 6 5
2/3
6
1 / 2 / 3
4
5
2 / 3
1 / 2 / 3
4 6 5
Hide quick links:
Advertisement
Table of Contents
