Output Screen - Panasonic AW-HE130W Operating Instructions Manual

Camera menu items (continued)

Output screen

O u t p u t
For m a t
Dow n C O N V . M o d e
Fre q u e n c y
Col o r B a r s S e t u p
Ret u r n
Format
[(For 59.94Hz) 1080/59.94p, 1080/29.97p, 1080/23.98p,
1080/59.94i, 1080/29.97PsF, 1080/23.98PsF, 720/59.94p,
480/59.94p(i), (For 50Hz) 1080/50p, 1080/25p, 1080/50i,
1080/25PsF, 720/50p, 576/50p(i)]
The video format is changed on this screen.
For details on how to change the format, refer to "Changing the
format" (→ page 56).
In the case of the 480/59.94p(i) or 576/50p(i) format, the P signal is
output to the HDMI connector, and the I signal is output to the SDI
output and analog component output connectors.
Down CONV. Mode
[Squeeze, SideCut, LetterBox]
The down-conversion mode is selected here.
This setting is used when the aspect
ratio of the monitor is to be set to 16:9.
If the monitor is set to the 4:3 aspect
ratio, the images will be squeezed in the
width direction and extended in the height
Squeeze
direction.
This setting is used when the aspect ratio
of the monitor is to be set to 4:3. With the
vertical height serving as the reference,
the parts which extend beyond this at the
two sides are cropped changing the view
SideCut
of the angle.
This setting is used when the aspect ratio
of the monitor is to be set to 4:3. With the
horizontal width serving as the reference,
black bands are added at the top and
bottom changing the view of the angle.
LetterBox
• The mode switches when the setting is fixed.
1 0 8 0 / 5 9 . 9 4 i
S q u e e z e
5 9 . 9 4 H z
O f f
Frequency [59.94Hz, 50Hz]
This item is selected to switch the frame frequency.
• When the frequency is switched, [Format] is set as follows.
59.94Hz
1080/59.94p
1080/29.97p
1080/23.98p
1080/59.94i
1080/29.97PsF
1080/23.98PsF
720/59.94p
480/59.94p(i)
• For details on how to change the frequency, refer to "Changing the
frequency" (→ page 56).
Color Bars Setup [Off, On]
This is only enabled when [Frequency] is set to [59.94Hz].
Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for the
VIDEO OUT signal.
Return
Return to the previous menu level.
50Hz
1080/50p

1080/25p

1080/25p

1080/50i

1080/25PsF

1080/25PsF

720/50p

480/59.94p(i)

55